Mercurial > pub > halpp
comparison f103c8/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h @ 2:0c59e7a7782a
Working on GPIO and RCC
author | cin |
---|---|
date | Mon, 16 Jan 2017 11:04:47 +0300 |
parents | |
children |
comparison
equal
deleted
inserted
replaced
1:a0b14b11ad9f | 2:0c59e7a7782a |
---|---|
1 /** | |
2 ****************************************************************************** | |
3 * @file stm32f1xx.h | |
4 * @author MCD Application Team | |
5 * @version V4.1.0 | |
6 * @date 29-April-2016 | |
7 * @brief CMSIS STM32F1xx Device Peripheral Access Layer Header File. | |
8 * | |
9 * The file is the unique include file that the application programmer | |
10 * is using in the C source code, usually in main.c. This file contains: | |
11 * - Configuration section that allows to select: | |
12 * - The STM32F1xx device used in the target application | |
13 * - To use or not the peripheral’s drivers in application code(i.e. | |
14 * code will be based on direct access to peripheral’s registers | |
15 * rather than drivers API), this option is controlled by | |
16 * "#define USE_HAL_DRIVER" | |
17 * | |
18 ****************************************************************************** | |
19 * @attention | |
20 * | |
21 * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
22 * | |
23 * Redistribution and use in source and binary forms, with or without modification, | |
24 * are permitted provided that the following conditions are met: | |
25 * 1. Redistributions of source code must retain the above copyright notice, | |
26 * this list of conditions and the following disclaimer. | |
27 * 2. Redistributions in binary form must reproduce the above copyright notice, | |
28 * this list of conditions and the following disclaimer in the documentation | |
29 * and/or other materials provided with the distribution. | |
30 * 3. Neither the name of STMicroelectronics nor the names of its contributors | |
31 * may be used to endorse or promote products derived from this software | |
32 * without specific prior written permission. | |
33 * | |
34 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
35 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
36 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
37 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
38 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
39 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
40 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
41 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
42 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
43 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
44 * | |
45 ****************************************************************************** | |
46 */ | |
47 | |
48 /** @addtogroup CMSIS | |
49 * @{ | |
50 */ | |
51 | |
52 /** @addtogroup stm32f1xx | |
53 * @{ | |
54 */ | |
55 | |
56 #ifndef __STM32F1XX_H | |
57 #define __STM32F1XX_H | |
58 | |
59 #ifdef __cplusplus | |
60 extern "C" { | |
61 #endif /* __cplusplus */ | |
62 | |
63 /** @addtogroup Library_configuration_section | |
64 * @{ | |
65 */ | |
66 | |
67 /** | |
68 * @brief STM32 Family | |
69 */ | |
70 #if !defined (STM32F1) | |
71 #define STM32F1 | |
72 #endif /* STM32F1 */ | |
73 | |
74 /* Uncomment the line below according to the target STM32L device used in your | |
75 application | |
76 */ | |
77 | |
78 #if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \ | |
79 !defined (STM32F101xB) && !defined (STM32F101xE) && !defined (STM32F101xG) && !defined (STM32F102x6) && !defined (STM32F102xB) && !defined (STM32F103x6) && \ | |
80 !defined (STM32F103xB) && !defined (STM32F103xE) && !defined (STM32F103xG) && !defined (STM32F105xC) && !defined (STM32F107xC) | |
81 /* #define STM32F100xB */ /*!< STM32F100C4, STM32F100R4, STM32F100C6, STM32F100R6, STM32F100C8, STM32F100R8, STM32F100V8, STM32F100CB, STM32F100RB and STM32F100VB */ | |
82 /* #define STM32F100xE */ /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */ | |
83 /* #define STM32F101x6 */ /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */ | |
84 /* #define STM32F101xB */ /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */ | |
85 /* #define STM32F101xE */ /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */ | |
86 /* #define STM32F101xG */ /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */ | |
87 /* #define STM32F102x6 */ /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */ | |
88 /* #define STM32F102xB */ /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */ | |
89 /* #define STM32F103x6 */ /*!< STM32F103C4, STM32F103R4, STM32F103T4, STM32F103C6, STM32F103R6 and STM32F103T6 */ | |
90 /* #define STM32F103xB */ /*!< STM32F103C8, STM32F103R8, STM32F103T8, STM32F103V8, STM32F103CB, STM32F103RB, STM32F103TB and STM32F103VB */ | |
91 /* #define STM32F103xE */ /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */ | |
92 /* #define STM32F103xG */ /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */ | |
93 /* #define STM32F105xC */ /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */ | |
94 /* #define STM32F107xC */ /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */ | |
95 #endif | |
96 | |
97 /* Tip: To avoid modifying this file each time you need to switch between these | |
98 devices, you can define the device in your toolchain compiler preprocessor. | |
99 */ | |
100 | |
101 #if !defined (USE_HAL_DRIVER) | |
102 /** | |
103 * @brief Comment the line below if you will not use the peripherals drivers. | |
104 In this case, these drivers will not be included and the application code will | |
105 be based on direct access to peripherals registers | |
106 */ | |
107 /*#define USE_HAL_DRIVER */ | |
108 #endif /* USE_HAL_DRIVER */ | |
109 | |
110 /** | |
111 * @brief CMSIS Device version number | |
112 */ | |
113 #define __STM32F1_CMSIS_VERSION_MAIN (0x04) /*!< [31:24] main version */ | |
114 #define __STM32F1_CMSIS_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */ | |
115 #define __STM32F1_CMSIS_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ | |
116 #define __STM32F1_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */ | |
117 #define __STM32F1_CMSIS_VERSION ((__STM32F1_CMSIS_VERSION_MAIN << 24)\ | |
118 |(__STM32F1_CMSIS_VERSION_SUB1 << 16)\ | |
119 |(__STM32F1_CMSIS_VERSION_SUB2 << 8 )\ | |
120 |(__STM32F1_CMSIS_VERSION_RC)) | |
121 | |
122 /** | |
123 * @} | |
124 */ | |
125 | |
126 /** @addtogroup Device_Included | |
127 * @{ | |
128 */ | |
129 | |
130 #if defined(STM32F100xB) | |
131 #include "stm32f100xb.h" | |
132 #elif defined(STM32F100xE) | |
133 #include "stm32f100xe.h" | |
134 #elif defined(STM32F101x6) | |
135 #include "stm32f101x6.h" | |
136 #elif defined(STM32F101xB) | |
137 #include "stm32f101xb.h" | |
138 #elif defined(STM32F101xE) | |
139 #include "stm32f101xe.h" | |
140 #elif defined(STM32F101xG) | |
141 #include "stm32f101xg.h" | |
142 #elif defined(STM32F102x6) | |
143 #include "stm32f102x6.h" | |
144 #elif defined(STM32F102xB) | |
145 #include "stm32f102xb.h" | |
146 #elif defined(STM32F103x6) | |
147 #include "stm32f103x6.h" | |
148 #elif defined(STM32F103xB) | |
149 #include "stm32f103xb.h" | |
150 #elif defined(STM32F103xE) | |
151 #include "stm32f103xe.h" | |
152 #elif defined(STM32F103xG) | |
153 #include "stm32f103xg.h" | |
154 #elif defined(STM32F105xC) | |
155 #include "stm32f105xc.h" | |
156 #elif defined(STM32F107xC) | |
157 #include "stm32f107xc.h" | |
158 #else | |
159 #error "Please select first the target STM32F1xx device used in your application (in stm32f1xx.h file)" | |
160 #endif | |
161 | |
162 /** | |
163 * @} | |
164 */ | |
165 | |
166 /** @addtogroup Exported_types | |
167 * @{ | |
168 */ | |
169 typedef enum | |
170 { | |
171 RESET = 0, | |
172 SET = !RESET | |
173 } FlagStatus, ITStatus; | |
174 | |
175 typedef enum | |
176 { | |
177 DISABLE = 0, | |
178 ENABLE = !DISABLE | |
179 } FunctionalState; | |
180 #define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) | |
181 | |
182 typedef enum | |
183 { | |
184 ERROR = 0, | |
185 SUCCESS = !ERROR | |
186 } ErrorStatus; | |
187 | |
188 /** | |
189 * @} | |
190 */ | |
191 | |
192 | |
193 /** @addtogroup Exported_macros | |
194 * @{ | |
195 */ | |
196 #define SET_BIT(REG, BIT) ((REG) |= (BIT)) | |
197 | |
198 #define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) | |
199 | |
200 #define READ_BIT(REG, BIT) ((REG) & (BIT)) | |
201 | |
202 #define CLEAR_REG(REG) ((REG) = (0x0)) | |
203 | |
204 #define WRITE_REG(REG, VAL) ((REG) = (VAL)) | |
205 | |
206 #define READ_REG(REG) ((REG)) | |
207 | |
208 #define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) | |
209 | |
210 #define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) | |
211 | |
212 | |
213 /** | |
214 * @} | |
215 */ | |
216 | |
217 #if defined (USE_HAL_DRIVER) | |
218 #include "stm32f1xx_hal.h" | |
219 #endif /* USE_HAL_DRIVER */ | |
220 | |
221 | |
222 #ifdef __cplusplus | |
223 } | |
224 #endif /* __cplusplus */ | |
225 | |
226 #endif /* __STM32F1xx_H */ | |
227 /** | |
228 * @} | |
229 */ | |
230 | |
231 /** | |
232 * @} | |
233 */ | |
234 | |
235 | |
236 | |
237 | |
238 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |