Mercurial > pub > halpp

comparison l476rg/Inc/stm32l4xx_hal_conf.h @ 0:32a3b1785697

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
a rough draft of Hardware Abstraction Layer for C++ STM32L476RG drivers
author cin
date Thu, 12 Jan 2017 02:45:43 +0300
parents
children
comparison
equal deleted inserted replaced
-1:000000000000 0:32a3b1785697
1 /**
2 ******************************************************************************
3 * @file stm32l4xx_hal_conf.h
4 * @brief HAL configuration file.
5 ******************************************************************************
6 * @attention
7 *
8 * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
9 *
10 * Redistribution and use in source and binary forms, with or without modification,
11 * are permitted provided that the following conditions are met:
12 * 1. Redistributions of source code must retain the above copyright notice,
13 * this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright notice,
15 * this list of conditions and the following disclaimer in the documentation
16 * and/or other materials provided with the distribution.
17 * 3. Neither the name of STMicroelectronics nor the names of its contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
20 *
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
22 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
24 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
27 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
28 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 *
32 ******************************************************************************
33 */
34
35 /* Define to prevent recursive inclusion -------------------------------------*/
36 #ifndef __STM32L4xx_HAL_CONF_H
37 #define __STM32L4xx_HAL_CONF_H
38
39 #ifdef __cplusplus
40 extern "C" {
41 #endif
42
43 #include "main.h"
44 /* Exported types ------------------------------------------------------------*/
45 /* Exported constants --------------------------------------------------------*/
46
47 /* ########################## Module Selection ############################## */
48 /**
49 * @brief This is the list of modules to be used in the HAL driver
50 */
51
52 #define HAL_MODULE_ENABLED
53 /*#define HAL_ADC_MODULE_ENABLED */
54 /*#define HAL_CAN_MODULE_ENABLED */
55 /*#define HAL_COMP_MODULE_ENABLED */
56 /*#define HAL_CRC_MODULE_ENABLED */
57 /*#define HAL_CRYP_MODULE_ENABLED */
58 /*#define HAL_DAC_MODULE_ENABLED */
59 /*#define HAL_DCMI_MODULE_ENABLED */
60 /*#define HAL_DFSDM_MODULE_ENABLED */
61 /*#define HAL_FIREWALL_MODULE_ENABLED */
62 /*#define HAL_HCD_MODULE_ENABLED */
63 /*#define HAL_I2S_MODULE_ENABLED */
64 /*#define HAL_IRDA_MODULE_ENABLED */
65 /*#define HAL_IWDG_MODULE_ENABLED */
66 /*#define HAL_LCD_MODULE_ENABLED */
67 /*#define HAL_LPTIM_MODULE_ENABLED */
68 /*#define HAL_NAND_MODULE_ENABLED */
69 /*#define HAL_NOR_MODULE_ENABLED */
70 /*#define HAL_OPAMP_MODULE_ENABLED */
71 /*#define HAL_PCD_MODULE_ENABLED */
72 /*#define HAL_QSPI_MODULE_ENABLED */
73 /*#define HAL_RNG_MODULE_ENABLED */
74 /*#define HAL_RTC_MODULE_ENABLED */
75 /*#define HAL_SAI_MODULE_ENABLED */
76 /*#define HAL_SD_MODULE_ENABLED */
77 /*#define HAL_SMBUS_MODULE_ENABLED */
78 /*#define HAL_SMARTCARD_MODULE_ENABLED */
79 /*#define HAL_SPI_MODULE_ENABLED */
80 /*#define HAL_SRAM_MODULE_ENABLED */
81 /*#define HAL_SWPMI_MODULE_ENABLED */
82 #define HAL_TIM_MODULE_ENABLED
83 /*#define HAL_TSC_MODULE_ENABLED */
84 #define HAL_UART_MODULE_ENABLED
85 /*#define HAL_USART_MODULE_ENABLED */
86 /*#define HAL_WWDG_MODULE_ENABLED */
87 #define HAL_GPIO_MODULE_ENABLED
88 #define HAL_I2C_MODULE_ENABLED
89 #define HAL_DMA_MODULE_ENABLED
90 #define HAL_RCC_MODULE_ENABLED
91 #define HAL_FLASH_MODULE_ENABLED
92 #define HAL_PWR_MODULE_ENABLED
93 #define HAL_CORTEX_MODULE_ENABLED
94
95 /* ########################## Oscillator Values adaptation ####################*/
96 /**
97 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
98 * This value is used by the RCC HAL module to compute the system frequency
99 * (when HSE is used as system clock source, directly or through the PLL).
100 */
101 #if !defined (HSE_VALUE)
102 #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
103 #endif /* HSE_VALUE */
104
105 #if !defined (HSE_STARTUP_TIMEOUT)
106 #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
107 #endif /* HSE_STARTUP_TIMEOUT */
108
109 /**
110 * @brief Internal Multiple Speed oscillator (MSI) default value.
111 * This value is the default MSI range value after Reset.
112 */
113 #if !defined (MSI_VALUE)
114 #define MSI_VALUE ((uint32_t)4000000U) /*!< Value of the Internal oscillator in Hz*/
115 #endif /* MSI_VALUE */
116 /**
117 * @brief Internal High Speed oscillator (HSI) value.
118 * This value is used by the RCC HAL module to compute the system frequency
119 * (when HSI is used as system clock source, directly or through the PLL).
120 */
121 #if !defined (HSI_VALUE)
122 #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
123 #endif /* HSI_VALUE */
124
125 /**
126 * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
127 * This internal oscillator is mainly dedicated to provide a high precision clock to
128 * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
129 * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
130 * which is subject to manufacturing process variations.
131 */
132 #if !defined (HSI48_VALUE)
133 #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
134 The real value my vary depending on manufacturing process variations.*/
135 #endif /* HSI48_VALUE */
136
137 /**
138 * @brief Internal Low Speed oscillator (LSI) value.
139 */
140 #if !defined (LSI_VALUE)
141 #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
142 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
143 The real value may vary depending on the variations
144 in voltage and temperature.*/
145
146 /**
147 * @brief External Low Speed oscillator (LSE) value.
148 * This value is used by the UART, RTC HAL module to compute the system frequency
149 */
150 #if !defined (LSE_VALUE)
151 #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
152 #endif /* LSE_VALUE */
153
154 #if !defined (LSE_STARTUP_TIMEOUT)
155 #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
156 #endif /* HSE_STARTUP_TIMEOUT */
157
158 /**
159 * @brief External clock source for SAI1 peripheral
160 * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
161 * frequency.
162 */
163 #if !defined (EXTERNAL_SAI1_CLOCK_VALUE)
164 #define EXTERNAL_SAI1_CLOCK_VALUE ((uint32_t)2097000U) /*!< Value of the SAI1 External clock source in Hz*/
165 #endif /* EXTERNAL_SAI1_CLOCK_VALUE */
166
167 /**
168 * @brief External clock source for SAI2 peripheral
169 * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
170 * frequency.
171 */
172 #if !defined (EXTERNAL_SAI2_CLOCK_VALUE)
173 #define EXTERNAL_SAI2_CLOCK_VALUE ((uint32_t)2097000U) /*!< Value of the SAI2 External clock source in Hz*/
174 #endif /* EXTERNAL_SAI2_CLOCK_VALUE */
175
176 /* Tip: To avoid modifying this file each time you need to use different HSE,
177 === you can define the HSE value in your toolchain compiler preprocessor. */
178
179 /* ########################### System Configuration ######################### */
180 /**
181 * @brief This is the HAL system configuration section
182 */
183
184 #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
185 #define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
186 #define USE_RTOS 0U
187 #define PREFETCH_ENABLE 1U
188 #define INSTRUCTION_CACHE_ENABLE 1U
189 #define DATA_CACHE_ENABLE 1U
190
191 /* ########################## Assert Selection ############################## */
192 /**
193 * @brief Uncomment the line below to expanse the "assert_param" macro in the
194 * HAL drivers code
195 */
196 /* #define USE_FULL_ASSERT 1 */
197
198 /* Includes ------------------------------------------------------------------*/
199 /**
200 * @brief Include module's header file
201 */
202
203 #ifdef HAL_RCC_MODULE_ENABLED
204 #include "stm32l4xx_hal_rcc.h"
205 #endif /* HAL_RCC_MODULE_ENABLED */
206
207 #ifdef HAL_GPIO_MODULE_ENABLED
208 #include "stm32l4xx_hal_gpio.h"
209 #endif /* HAL_GPIO_MODULE_ENABLED */
210
211 #ifdef HAL_DMA_MODULE_ENABLED
212 #include "stm32l4xx_hal_dma.h"
213 #endif /* HAL_DMA_MODULE_ENABLED */
214
215 #ifdef HAL_DFSDM_MODULE_ENABLED
216 #include "stm32l4xx_hal_dfsdm.h"
217 #endif /* HAL_DFSDM_MODULE_ENABLED */
218
219 #ifdef HAL_CORTEX_MODULE_ENABLED
220 #include "stm32l4xx_hal_cortex.h"
221 #endif /* HAL_CORTEX_MODULE_ENABLED */
222
223 #ifdef HAL_ADC_MODULE_ENABLED
224 #include "stm32l4xx_hal_adc.h"
225 #endif /* HAL_ADC_MODULE_ENABLED */
226
227 #ifdef HAL_CAN_MODULE_ENABLED
228 #include "stm32l4xx_hal_can.h"
229 #endif /* HAL_CAN_MODULE_ENABLED */
230
231 #ifdef HAL_COMP_MODULE_ENABLED
232 #include "stm32l4xx_hal_comp.h"
233 #endif /* HAL_COMP_MODULE_ENABLED */
234
235 #ifdef HAL_CRC_MODULE_ENABLED
236 #include "stm32l4xx_hal_crc.h"
237 #endif /* HAL_CRC_MODULE_ENABLED */
238
239 #ifdef HAL_CRYP_MODULE_ENABLED
240 #include "stm32l4xx_hal_cryp.h"
241 #endif /* HAL_CRYP_MODULE_ENABLED */
242
243 #ifdef HAL_DAC_MODULE_ENABLED
244 #include "stm32l4xx_hal_dac.h"
245 #endif /* HAL_DAC_MODULE_ENABLED */
246
247 #ifdef HAL_DCMI_MODULE_ENABLED
248 #include "stm32l4xx_hal_dcmi.h"
249 #endif /* HAL_DCMI_MODULE_ENABLED */
250
251 #ifdef HAL_FIREWALL_MODULE_ENABLED
252 #include "stm32l4xx_hal_firewall.h"
253 #endif /* HAL_FLASH_MODULE_ENABLED */
254
255 #ifdef HAL_FLASH_MODULE_ENABLED
256 #include "stm32l4xx_hal_flash.h"
257 #endif /* HAL_FLASH_MODULE_ENABLED */
258
259 #ifdef HAL_SRAM_MODULE_ENABLED
260 #include "stm32l4xx_hal_sram.h"
261 #endif /* HAL_SRAM_MODULE_ENABLED */
262
263 #ifdef HAL_NOR_MODULE_ENABLED
264 #include "stm32l4xx_hal_nor.h"
265 #endif /* HAL_NOR_MODULE_ENABLED */
266
267 #ifdef HAL_NAND_MODULE_ENABLED
268 #include "stm32l4xx_hal_nand.h"
269 #endif /* HAL_NAND_MODULE_ENABLED */
270
271 #ifdef HAL_I2C_MODULE_ENABLED
272 #include "stm32l4xx_hal_i2c.h"
273 #endif /* HAL_I2C_MODULE_ENABLED */
274
275 #ifdef HAL_IWDG_MODULE_ENABLED
276 #include "stm32l4xx_hal_iwdg.h"
277 #endif /* HAL_IWDG_MODULE_ENABLED */
278
279 #ifdef HAL_LCD_MODULE_ENABLED
280 #include "stm32l4xx_hal_lcd.h"
281 #endif /* HAL_LCD_MODULE_ENABLED */
282
283 #ifdef HAL_LPTIM_MODULE_ENABLED
284 #include "stm32l4xx_hal_lptim.h"
285 #endif /* HAL_LPTIM_MODULE_ENABLED */
286
287 #ifdef HAL_OPAMP_MODULE_ENABLED
288 #include "stm32l4xx_hal_opamp.h"
289 #endif /* HAL_OPAMP_MODULE_ENABLED */
290
291 #ifdef HAL_PWR_MODULE_ENABLED
292 #include "stm32l4xx_hal_pwr.h"
293 #endif /* HAL_PWR_MODULE_ENABLED */
294
295 #ifdef HAL_QSPI_MODULE_ENABLED
296 #include "stm32l4xx_hal_qspi.h"
297 #endif /* HAL_QSPI_MODULE_ENABLED */
298
299 #ifdef HAL_RNG_MODULE_ENABLED
300 #include "stm32l4xx_hal_rng.h"
301 #endif /* HAL_RNG_MODULE_ENABLED */
302
303 #ifdef HAL_RTC_MODULE_ENABLED
304 #include "stm32l4xx_hal_rtc.h"
305 #endif /* HAL_RTC_MODULE_ENABLED */
306
307 #ifdef HAL_SAI_MODULE_ENABLED
308 #include "stm32l4xx_hal_sai.h"
309 #endif /* HAL_SAI_MODULE_ENABLED */
310
311 #ifdef HAL_SD_MODULE_ENABLED
312 #include "stm32l4xx_hal_sd.h"
313 #endif /* HAL_SD_MODULE_ENABLED */
314
315 #ifdef HAL_SMBUS_MODULE_ENABLED
316 #include "stm32l4xx_hal_smbus.h"
317 #endif /* HAL_SMBUS_MODULE_ENABLED */
318
319 #ifdef HAL_SPI_MODULE_ENABLED
320 #include "stm32l4xx_hal_spi.h"
321 #endif /* HAL_SPI_MODULE_ENABLED */
322
323 #ifdef HAL_SWPMI_MODULE_ENABLED
324 #include "stm32l4xx_hal_swpmi.h"
325 #endif /* HAL_SWPMI_MODULE_ENABLED */
326
327 #ifdef HAL_TIM_MODULE_ENABLED
328 #include "stm32l4xx_hal_tim.h"
329 #endif /* HAL_TIM_MODULE_ENABLED */
330
331 #ifdef HAL_TSC_MODULE_ENABLED
332 #include "stm32l4xx_hal_tsc.h"
333 #endif /* HAL_TSC_MODULE_ENABLED */
334
335 #ifdef HAL_UART_MODULE_ENABLED
336 #include "stm32l4xx_hal_uart.h"
337 #endif /* HAL_UART_MODULE_ENABLED */
338
339 #ifdef HAL_USART_MODULE_ENABLED
340 #include "stm32l4xx_hal_usart.h"
341 #endif /* HAL_USART_MODULE_ENABLED */
342
343 #ifdef HAL_IRDA_MODULE_ENABLED
344 #include "stm32l4xx_hal_irda.h"
345 #endif /* HAL_IRDA_MODULE_ENABLED */
346
347 #ifdef HAL_SMARTCARD_MODULE_ENABLED
348 #include "stm32l4xx_hal_smartcard.h"
349 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
350
351 #ifdef HAL_WWDG_MODULE_ENABLED
352 #include "stm32l4xx_hal_wwdg.h"
353 #endif /* HAL_WWDG_MODULE_ENABLED */
354
355 #ifdef HAL_PCD_MODULE_ENABLED
356 #include "stm32l4xx_hal_pcd.h"
357 #endif /* HAL_PCD_MODULE_ENABLED */
358
359 #ifdef HAL_HCD_MODULE_ENABLED
360 #include "stm32l4xx_hal_hcd.h"
361 #endif /* HAL_HCD_MODULE_ENABLED */
362
363 /* Exported macro ------------------------------------------------------------*/
364 #ifdef USE_FULL_ASSERT
365 /**
366 * @brief The assert_param macro is used for function's parameters check.
367 * @param expr: If expr is false, it calls assert_failed function
368 * which reports the name of the source file and the source
369 * line number of the call that failed.
370 * If expr is true, it returns no value.
371 * @retval None
372 */
373 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
374 /* Exported functions ------------------------------------------------------- */
375 void assert_failed(uint8_t* file, uint32_t line);
376 #else
377 #define assert_param(expr) ((void)0U)
378 #endif /* USE_FULL_ASSERT */
379
380 #ifdef __cplusplus
381 }
382 #endif
383
384 #endif /* __STM32L4xx_HAL_CONF_H */
385
386 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/