--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/f103c8/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c	Mon Jan 16 11:04:47 2017 +0300
@@ -0,0 +1,526 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    29-April-2016
+  * @brief   HAL module driver.
+  *          This is the common part of the HAL initialization
+  *
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The common HAL driver contains a set of generic and common APIs that can be
+    used by the PPP peripheral drivers and the user to start using the HAL. 
+    [..]
+    The HAL contains two APIs' categories: 
+         (+) Common HAL APIs
+         (+) Services HAL APIs
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup HAL HAL
+  * @brief HAL module driver.
+  * @{
+  */
+
+#ifdef HAL_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup HAL_Private_Constants HAL Private Constants
+  * @{
+  */
+
+/**
+ * @brief STM32F1xx HAL Driver version number
+   */
+#define __STM32F1xx_HAL_VERSION_MAIN   (0x01) /*!< [31:24] main version */
+#define __STM32F1xx_HAL_VERSION_SUB1   (0x00) /*!< [23:16] sub1 version */
+#define __STM32F1xx_HAL_VERSION_SUB2   (0x04) /*!< [15:8]  sub2 version */
+#define __STM32F1xx_HAL_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
+#define __STM32F1xx_HAL_VERSION         ((__STM32F1xx_HAL_VERSION_MAIN << 24)\
+                                        |(__STM32F1xx_HAL_VERSION_SUB1 << 16)\
+                                        |(__STM32F1xx_HAL_VERSION_SUB2 << 8 )\
+                                        |(__STM32F1xx_HAL_VERSION_RC))
+
+#define IDCODE_DEVID_MASK    ((uint32_t)0x00000FFF)
+
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/** @defgroup HAL_Private_Variables HAL Private Variables
+  * @{
+  */
+
+static __IO uint32_t uwTick;
+
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Functions HAL Exported Functions
+  * @{
+  */
+
+/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions 
+ *  @brief    Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+   [..]  This section provides functions allowing to:
+      (+) Initializes the Flash interface, the NVIC allocation and initial clock 
+          configuration. It initializes the source of time base also when timeout 
+          is needed and the backup domain when enabled.
+      (+) de-Initializes common part of the HAL.
+      (+) Configure The time base source to have 1ms time base with a dedicated 
+          Tick interrupt priority. 
+        (++) Systick timer is used by default as source of time base, but user 
+             can eventually implement his proper time base source (a general purpose 
+             timer for example or other time source), keeping in mind that Time base 
+             duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and 
+             handled in milliseconds basis.
+        (++) Time base configuration function (HAL_InitTick ()) is called automatically 
+             at the beginning of the program after reset by HAL_Init() or at any time 
+             when clock is configured, by HAL_RCC_ClockConfig(). 
+        (++) Source of time base is configured  to generate interrupts at regular 
+             time intervals. Care must be taken if HAL_Delay() is called from a 
+             peripheral ISR process, the Tick interrupt line must have higher priority 
+            (numerically lower) than the peripheral interrupt. Otherwise the caller 
+            ISR process will be blocked. 
+       (++) functions affecting time base configurations are declared as __Weak  
+             to make  override possible  in case of other  implementations in user file.
+ 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief This function configures the Flash prefetch, 
+  *        Configures time base source, NVIC and Low level hardware
+  * @note This function is called at the beginning of program after reset and before 
+  *       the clock configuration
+  * @note The time base configuration is based on MSI clock when exiting from Reset.
+  *       Once done, time base tick start incrementing.
+  *        In the default implementation,Systick is used as source of time base.
+  *       The tick variable is incremented each 1ms in its ISR.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_Init(void)
+{
+  /* Configure Flash prefetch */
+#if (PREFETCH_ENABLE != 0)
+#if defined(STM32F101x6) || defined(STM32F101xB) || defined(STM32F101xE) || defined(STM32F101xG) || \
+    defined(STM32F102x6) || defined(STM32F102xB) || \
+    defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \
+    defined(STM32F105xC) || defined(STM32F107xC)
+
+  /* Prefetch buffer is not available on value line devices */
+  __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
+#endif
+#endif /* PREFETCH_ENABLE */
+
+  /* Set Interrupt Group Priority */
+  HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+
+  /* Use systick as time base source and configure 1ms tick (default clock after Reset is MSI) */
+  HAL_InitTick(TICK_INT_PRIORITY);
+
+  /* Init the low level hardware */
+  HAL_MspInit();
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief This function de-Initializes common part of the HAL and stops the source
+  *        of time base.
+  * @note This function is optional.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DeInit(void)
+{
+  /* Reset of all peripherals */
+  __HAL_RCC_APB1_FORCE_RESET();
+  __HAL_RCC_APB1_RELEASE_RESET();
+
+  __HAL_RCC_APB2_FORCE_RESET();
+  __HAL_RCC_APB2_RELEASE_RESET();
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+  __HAL_RCC_AHB_FORCE_RESET();
+  __HAL_RCC_AHB_RELEASE_RESET();
+#endif
+  
+  /* De-Init the low level hardware */
+  HAL_MspDeInit();
+    
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the MSP.
+  * @retval None
+  */
+__weak void HAL_MspInit(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the MSP.
+  * @retval None
+  */
+__weak void HAL_MspDeInit(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief This function configures the source of the time base. 
+  *        The time source is configured  to have 1ms time base with a dedicated 
+  *        Tick interrupt priority.
+  * @note This function is called  automatically at the beginning of program after
+  *       reset by HAL_Init() or at any time when clock is reconfigured  by HAL_RCC_ClockConfig(). 
+  * @note In the default implementation, SysTick timer is the source of time base. 
+  *       It is used to generate interrupts at regular time intervals. 
+  *       Care must be taken if HAL_Delay() is called from a peripheral ISR process, 
+  *       The the SysTick interrupt must have higher priority (numerically lower) 
+  *       than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
+  *       The function is declared as __Weak  to be overwritten  in case of other
+  *       implementation  in user file.
+  * @param TickPriority: Tick interrupt priority.
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
+{
+  /*Configure the SysTick to have interrupt in 1ms time basis*/
+  HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000);
+
+  /*Configure the SysTick IRQ priority */
+  HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority ,0);
+
+   /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions 
+ *  @brief    HAL Control functions
+ *
+@verbatim
+ ===============================================================================
+                      ##### HAL Control functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Provide a tick value in millisecond
+      (+) Provide a blocking delay in millisecond
+      (+) Suspend the time base source interrupt
+      (+) Resume the time base source interrupt
+      (+) Get the HAL API driver version
+      (+) Get the device identifier
+      (+) Get the device revision identifier
+      (+) Enable/Disable Debug module during Sleep mode
+      (+) Enable/Disable Debug module during STOP mode
+      (+) Enable/Disable Debug module during STANDBY mode
+      
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief This function is called to increment  a global variable "uwTick"
+  *        used as application time base.
+  * @note In the default implementation, this variable is incremented each 1ms
+  *       in Systick ISR.
+  * @note This function is declared as __weak to be overwritten in case of other 
+  *      implementations in user file.
+  * @retval None
+  */
+__weak void HAL_IncTick(void)
+{
+  uwTick++;
+}
+
+/**
+  * @brief Provides a tick value in millisecond.
+  * @note   This function is declared as __weak  to be overwritten  in case of other 
+  *       implementations in user file.
+  * @retval tick value
+  */
+__weak uint32_t HAL_GetTick(void)
+{
+  return uwTick;
+}
+
+/**
+  * @brief This function provides accurate delay (in milliseconds) based 
+  *        on variable incremented.
+  * @note In the default implementation , SysTick timer is the source of time base.
+  *       It is used to generate interrupts at regular time intervals where uwTick
+  *       is incremented.
+  * @note ThiS function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @param Delay: specifies the delay time length, in milliseconds.
+  * @retval None
+  */
+__weak void HAL_Delay(__IO uint32_t Delay)
+{
+  uint32_t tickstart = 0;
+  tickstart = HAL_GetTick();
+  while((HAL_GetTick() - tickstart) < Delay)
+  {
+  }
+}
+
+/**
+  * @brief Suspend Tick increment.
+  * @note In the default implementation , SysTick timer is the source of time base. It is
+  *       used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
+  *       is called, the the SysTick interrupt will be disabled and so Tick increment 
+  *       is suspended.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_SuspendTick(void)
+{
+  /* Disable SysTick Interrupt */
+  CLEAR_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk);
+}
+
+/**
+  * @brief Resume Tick increment.
+  * @note In the default implementation , SysTick timer is the source of time base. It is
+  *       used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
+  *       is called, the the SysTick interrupt will be enabled and so Tick increment 
+  *       is resumed.
+  * @note This function is declared as __weak  to be overwritten  in case of other
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_ResumeTick(void)
+{
+  /* Enable SysTick Interrupt */
+  SET_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk);
+}
+
+/**
+  * @brief  This method returns the HAL revision
+  * @retval version: 0xXYZR (8bits for each decimal, R for RC)
+  */
+uint32_t HAL_GetHalVersion(void)
+{
+ return __STM32F1xx_HAL_VERSION;
+}
+
+/**
+  * @brief Returns the device revision identifier.
+  * Note: On devices STM32F10xx8 and STM32F10xxB,
+  *                  STM32F101xC/D/E and STM32F103xC/D/E,
+  *                  STM32F101xF/G and STM32F103xF/G
+  *                  STM32F10xx4 and STM32F10xx6
+  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in 
+  *       debug mode (not accessible by the user software in normal mode).
+  *       Refer to errata sheet of these devices for more details.
+  * @retval Device revision identifier
+  */
+uint32_t HAL_GetREVID(void)
+{
+  return((DBGMCU->IDCODE) >> POSITION_VAL(DBGMCU_IDCODE_REV_ID));
+}
+
+/**
+  * @brief  Returns the device identifier.
+  * Note: On devices STM32F10xx8 and STM32F10xxB,
+  *                  STM32F101xC/D/E and STM32F103xC/D/E,
+  *                  STM32F101xF/G and STM32F103xF/G
+  *                  STM32F10xx4 and STM32F10xx6
+  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in 
+  *       debug mode (not accessible by the user software in normal mode).
+  *       Refer to errata sheet of these devices for more details.
+  * @retval Device identifier
+  */
+uint32_t HAL_GetDEVID(void)
+{
+   return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
+}
+
+/**
+  * @brief  Enable the Debug Module during SLEEP mode
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGSleepMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+  * @brief  Disable the Debug Module during SLEEP mode
+  * Note: On devices STM32F10xx8 and STM32F10xxB,
+  *                  STM32F101xC/D/E and STM32F103xC/D/E,
+  *                  STM32F101xF/G and STM32F103xF/G
+  *                  STM32F10xx4 and STM32F10xx6
+  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in 
+  *       debug mode (not accessible by the user software in normal mode).
+  *       Refer to errata sheet of these devices for more details.
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGSleepMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+  * @brief  Enable the Debug Module during STOP mode
+  * Note: On devices STM32F10xx8 and STM32F10xxB,
+  *                  STM32F101xC/D/E and STM32F103xC/D/E,
+  *                  STM32F101xF/G and STM32F103xF/G
+  *                  STM32F10xx4 and STM32F10xx6
+  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in 
+  *       debug mode (not accessible by the user software in normal mode).
+  *       Refer to errata sheet of these devices for more details.
+  * Note: On all STM32F1 devices:
+  *       If the system tick timer interrupt is enabled during the Stop mode 
+  *       debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup
+  *       the system from Stop mode.
+  *       Workaround: To debug the Stop mode, disable the system tick timer 
+  *       interrupt.
+  *       Refer to errata sheet of these devices for more details.
+  * Note: On all STM32F1 devices:
+  *       If the system tick timer interrupt is enabled during the Stop mode  
+  *       debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup
+  *       the system from Stop mode.
+  *       Workaround: To debug the Stop mode, disable the system tick timer
+  *       interrupt.
+  *       Refer to errata sheet of these devices for more details.
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGStopMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+  * @brief  Disable the Debug Module during STOP mode
+  * Note: On devices STM32F10xx8 and STM32F10xxB,
+  *                  STM32F101xC/D/E and STM32F103xC/D/E,
+  *                  STM32F101xF/G and STM32F103xF/G
+  *                  STM32F10xx4 and STM32F10xx6
+  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in 
+  *       debug mode (not accessible by the user software in normal mode).
+  *       Refer to errata sheet of these devices for more details.
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGStopMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+  * @brief  Enable the Debug Module during STANDBY mode
+  * Note: On devices STM32F10xx8 and STM32F10xxB,
+  *                  STM32F101xC/D/E and STM32F103xC/D/E,
+  *                  STM32F101xF/G and STM32F103xF/G
+  *                  STM32F10xx4 and STM32F10xx6
+  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in 
+  *       debug mode (not accessible by the user software in normal mode).
+  *       Refer to errata sheet of these devices for more details.
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGStandbyMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+  * @brief  Disable the Debug Module during STANDBY mode
+  * Note: On devices STM32F10xx8 and STM32F10xxB,
+  *                  STM32F101xC/D/E and STM32F103xC/D/E,
+  *                  STM32F101xF/G and STM32F103xF/G
+  *                  STM32F10xx4 and STM32F10xx6
+  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in 
+  *       debug mode (not accessible by the user software in normal mode).
+  *       Refer to errata sheet of these devices for more details.
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGStandbyMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/