--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/f103c8/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c	Mon Jan 16 11:04:47 2017 +0300
@@ -0,0 +1,5379 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_tim.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    29-April-2016
+  * @brief   TIM HAL module driver
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Timer (TIM) peripheral:
+  *           + Time Base Initialization
+  *           + Time Base Start
+  *           + Time Base Start Interruption
+  *           + Time Base Start DMA
+  *           + Time Output Compare/PWM Initialization
+  *           + Time Output Compare/PWM Channel Configuration
+  *           + Time Output Compare/PWM  Start
+  *           + Time Output Compare/PWM  Start Interruption
+  *           + Time Output Compare/PWM Start DMA
+  *           + Time Input Capture Initialization
+  *           + Time Input Capture Channel Configuration
+  *           + Time Input Capture Start
+  *           + Time Input Capture Start Interruption 
+  *           + Time Input Capture Start DMA
+  *           + Time One Pulse Initialization
+  *           + Time One Pulse Channel Configuration
+  *           + Time One Pulse Start 
+  *           + Time Encoder Interface Initialization
+  *           + Time Encoder Interface Start
+  *           + Time Encoder Interface Start Interruption
+  *           + Time Encoder Interface Start DMA
+  *           + Commutation Event configuration with Interruption and DMA
+  *           + Time OCRef clear configuration
+  *           + Time External Clock configuration
+  @verbatim
+  ==============================================================================
+                      ##### TIMER Generic features #####
+  ==============================================================================
+  [..] The Timer features include:
+       (#) 16-bit up, down, up/down auto-reload counter.
+       (#) 16-bit programmable prescaler allowing dividing (also on the fly) the 
+           counter clock frequency either by any factor between 1 and 65536.
+       (#) Up to 4 independent channels for:
+           (++) Input Capture
+           (++) Output Compare
+           (++) PWM generation (Edge and Center-aligned Mode)
+           (++) One-pulse mode output 
+
+            ##### How to use this driver #####
+  ==============================================================================
+    [..]
+     (#) Initialize the TIM low level resources by implementing the following functions 
+         depending from feature used :
+           (++) Time Base : HAL_TIM_Base_MspInit()
+           (++) Input Capture : HAL_TIM_IC_MspInit()
+           (++) Output Compare : HAL_TIM_OC_MspInit()
+           (++) PWM generation : HAL_TIM_PWM_MspInit()
+           (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+           (++) Encoder mode output : HAL_TIM_Encoder_MspInit()
+
+     (#) Initialize the TIM low level resources :
+        (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE();
+        (##) TIM pins configuration
+            (+++) Enable the clock for the TIM GPIOs using the following function:
+             __HAL_RCC_GPIOx_CLK_ENABLE();
+            (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+     (#) The external Clock can be configured, if needed (the default clock is the 
+         internal clock from the APBx), using the following function:
+         HAL_TIM_ConfigClockSource, the clock configuration should be done before 
+         any start function.
+
+     (#) Configure the TIM in the desired functioning mode using one of the 
+       Initialization function of this driver:
+       (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
+       (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an 
+            Output Compare signal.
+       (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a 
+            PWM signal.
+       (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an 
+            external signal.
+         (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer 
+              in One Pulse Mode.
+       (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
+
+     (#) Activate the TIM peripheral using one of the start functions depending from the feature used:
+           (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
+           (++) Input Capture :  HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
+           (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
+           (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
+           (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
+           (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
+
+     (#) The DMA Burst is managed with the two following functions:
+         HAL_TIM_DMABurst_WriteStart()
+         HAL_TIM_DMABurst_ReadStart()
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup TIM TIM
+  * @brief TIM HAL module driver
+  * @{
+  */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup TIM_Private_Functions TIM Private Functions
+  * @{
+  */
+static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter);
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter);
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter);
+static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+                       uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
+static void TIM_ITRx_SetConfig(TIM_TypeDef* TIMx, uint16_t InputTriggerSource);
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma);
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+                                     TIM_SlaveConfigTypeDef * sSlaveConfig);
+
+/**
+  * @}
+  */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup TIM_Exported_Functions TIM Exported Functions
+  * @{
+  */
+
+/** @defgroup TIM_Exported_Functions_Group1 Time Base functions 
+ *  @brief    Time Base functions 
+ *
+@verbatim 
+  ==============================================================================
+              ##### Time Base functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM base.
+    (+) De-initialize the TIM base.
+    (+) Start the Time Base.
+    (+) Stop the Time Base.
+    (+) Start the Time Base and enable interrupt.
+    (+) Stop the Time Base and disable interrupt.
+    (+) Start the Time Base and enable DMA transfer.
+    (+) Stop the Time Base and disable DMA transfer.
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Time base Unit according to the specified
+  *         parameters in the TIM_HandleTypeDef and create the associated handle.
+  * @param  htim : TIM Base handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim)
+{
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+  if(htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+    
+    /* Init the low level hardware : GPIO, CLOCK, NVIC */
+    HAL_TIM_Base_MspInit(htim);
+  }
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+
+  /* Set the Time Base configuration */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM Base peripheral 
+  * @param  htim : TIM Base handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_TIM_Base_MspDeInit(htim);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Base MSP.
+  * @param  htim : TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_Base_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Base MSP.
+  * @param  htim : TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_Base_MspDeInit could be implemented in the user file
+   */
+}
+
+
+/**
+  * @brief  Starts the TIM Base generation.
+  * @param  htim : TIM handle
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Change the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Base generation.
+  * @param  htim : TIM handle
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Base generation in interrupt mode.
+  * @param  htim : TIM handle
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+   /* Enable the TIM Update interrupt */
+   __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE);
+
+   /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Base generation in interrupt mode.
+  * @param  htim : TIM handle
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  /* Disable the TIM Update interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Base generation in DMA mode.
+  * @param  htim : TIM handle
+  * @param  pData : The source Buffer address.
+  * @param  Length : The length of data to be transferred from memory to peripheral.
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if((pData == 0 ) && (Length > 0))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+  /* Set the DMA Period elapsed callback */
+  htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+  /* Set the DMA error callback */
+  htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+  /* Enable the DMA channel */
+  HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length);
+
+  /* Enable the TIM Update DMA request */
+  __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Base generation in DMA mode.
+  * @param  htim : TIM handle
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+  /* Disable the TIM Update DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group2 Time Output Compare functions 
+ *  @brief    Time Output Compare functions 
+ *
+@verbatim 
+  ==============================================================================
+                  ##### Time Output Compare functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM Output Compare.
+    (+) De-initialize the TIM Output Compare.
+    (+) Start the Time Output Compare.
+    (+) Stop the Time Output Compare.
+    (+) Start the Time Output Compare and enable interrupt.
+    (+) Stop the Time Output Compare and disable interrupt.
+    (+) Start the Time Output Compare and enable DMA transfer.
+    (+) Stop the Time Output Compare and disable DMA transfer.
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Output Compare according to the specified
+  *         parameters in the TIM_HandleTypeDef and create the associated handle.
+  * @param  htim : TIM Output Compare handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef* htim)
+{
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+  if(htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+    
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_OC_MspInit(htim);
+  }
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+
+  /* Init the base time for the Output Compare */
+  TIM_Base_SetConfig(htim->Instance,  &htim->Init);
+
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM peripheral 
+  * @param  htim : TIM Output Compare handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+   htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+  HAL_TIM_OC_MspDeInit(htim);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Output Compare MSP.
+  * @param  htim : TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_OC_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Output Compare MSP.
+  * @param  htim : TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_OC_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation.
+  * @param  htim : TIM Output Compare handle 
+  * @param  Channel : TIM Channel to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected 
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Enable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation.
+  * @param  htim : TIM handle
+  * @param  Channel : TIM Channel to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Disable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Ouput */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation in interrupt mode.
+  * @param  htim : TIM OC handle
+  * @param  Channel : TIM Channel to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Enable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Enable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Enable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation in interrupt mode.
+  * @param  htim : TIM Output Compare handle
+  * @param  Channel : TIM Channel to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Disable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Ouput */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation in DMA mode.
+  * @param  htim : TIM Output Compare handle
+  * @param  Channel : TIM Channel to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  pData : The source Buffer address.
+  * @param  Length : The length of data to be transferred from memory to TIM peripheral
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if(((uint32_t)pData == 0 ) && (Length > 0))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+      /* Enable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+      /* Enable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+      /* Enable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+     /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+      /* Enable the TIM Capture/Compare 4 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Enable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation in DMA mode.
+  * @param  htim : TIM Output Compare handle
+  * @param  Channel : TIM Channel to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Disable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Ouput */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group3 Time PWM functions 
+ *  @brief    Time PWM functions 
+ *
+@verbatim 
+  ==============================================================================
+                          ##### Time PWM functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM PWM.
+    (+) De-initialize the TIM PWM.
+    (+) Start the Time PWM.
+    (+) Stop the Time PWM.
+    (+) Start the Time PWM and enable interrupt.
+    (+) Stop the Time PWM and disable interrupt.
+    (+) Start the Time PWM and enable DMA transfer.
+    (+) Stop the Time PWM and disable DMA transfer.
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM PWM Time Base according to the specified
+  *         parameters in the TIM_HandleTypeDef and create the associated handle.
+  * @param  htim : TIM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim)
+{
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+  if(htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+    
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_PWM_MspInit(htim);
+  }
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+
+  /* Init the base time for the PWM */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM peripheral 
+  * @param  htim : TIM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+  HAL_TIM_PWM_MspDeInit(htim);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM PWM MSP.
+  * @param  htim : TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_PWM_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM PWM MSP.
+  * @param  htim : TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_PWM_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the PWM signal generation.
+  * @param  htim : TIM handle
+  * @param  Channel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Enable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the PWM signal generation.
+  * @param  htim : TIM handle
+  * @param  Channel : TIM Channels to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Disable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Ouput */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the PWM signal generation in interrupt mode.
+  * @param  htim : TIM handle
+  * @param  Channel : TIM Channel to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Enable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Enable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Enable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the PWM signal generation in interrupt mode.
+  * @param  htim : TIM handle
+  * @param  Channel : TIM Channels to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Disable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Ouput */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM PWM signal generation in DMA mode.
+  * @param  htim : TIM handle
+  * @param  Channel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  pData : The source Buffer address.
+  * @param  Length : The length of data to be transferred from memory to TIM peripheral
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if(((uint32_t)pData == 0 ) && (Length > 0))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+      /* Enable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+      /* Enable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+      /* Enable the TIM Output Capture/Compare 3 request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+     /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+      /* Enable the TIM Capture/Compare 4 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Enable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM PWM signal generation in DMA mode.
+  * @param  htim : TIM handle
+  * @param  Channel : TIM Channels to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Disable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Ouput */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group4 Time Input Capture functions 
+ *  @brief    Time Input Capture functions 
+ *
+@verbatim 
+  ==============================================================================
+              ##### Time Input Capture functions #####
+  ==============================================================================
+ [..]
+   This section provides functions allowing to:
+   (+) Initialize and configure the TIM Input Capture.
+   (+) De-initialize the TIM Input Capture.
+   (+) Start the Time Input Capture.
+   (+) Stop the Time Input Capture.
+   (+) Start the Time Input Capture and enable interrupt.
+   (+) Stop the Time Input Capture and disable interrupt.
+   (+) Start the Time Input Capture and enable DMA transfer.
+   (+) Stop the Time Input Capture and disable DMA transfer.
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Input Capture Time base according to the specified
+  *         parameters in the TIM_HandleTypeDef and create the associated handle.
+  * @param  htim : TIM Input Capture handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim)
+{
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+  if(htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+    
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_IC_MspInit(htim);
+  }
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+
+  /* Init the base time for the input capture */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM peripheral 
+  * @param  htim : TIM Input Capture handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+  HAL_TIM_IC_MspDeInit(htim);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Input Capture MSP.
+  * @param  htim : TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_IC_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Input Capture MSP.
+  * @param  htim : TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_IC_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM Input Capture measurement.
+  * @param  htim : TIM Input Capture handle
+  * @param  Channel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Enable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Input Capture measurement.
+  * @param  htim : TIM handle
+  * @param  Channel : TIM Channels to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Disable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Input Capture measurement in interrupt mode.
+  * @param  htim : TIM Input Capture handle
+  * @param  Channel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Enable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Enable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+  /* Enable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Input Capture measurement in interrupt mode.
+  * @param  htim : TIM handle
+  * @param  Channel : TIM Channels to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Disable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Input Capture measurement in DMA mode.
+  * @param  htim : TIM Input Capture handle
+  * @param  Channel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  pData : The destination Buffer address.
+  * @param  Length : The length of data to be transferred from TIM peripheral to memory.
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if((pData == 0 ) && (Length > 0))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
+
+      /* Enable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length);
+
+      /* Enable the TIM Capture/Compare 2  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length);
+
+      /* Enable the TIM Capture/Compare 3  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length);
+
+      /* Enable the TIM Capture/Compare 4  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Enable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Input Capture measurement in DMA mode.
+  * @param  htim : TIM Input Capture handle
+  * @param  Channel : TIM Channels to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Disable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3  DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4  DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  /* Disable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group5 Time One Pulse functions 
+ *  @brief    Time One Pulse functions 
+ *
+@verbatim 
+  ==============================================================================
+                        ##### Time One Pulse functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM One Pulse.
+    (+) De-initialize the TIM One Pulse.
+    (+) Start the Time One Pulse.
+    (+) Stop the Time One Pulse.
+    (+) Start the Time One Pulse and enable interrupt.
+    (+) Stop the Time One Pulse and disable interrupt.
+    (+) Start the Time One Pulse and enable DMA transfer.
+    (+) Stop the Time One Pulse and disable DMA transfer.
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM One Pulse Time Base according to the specified
+  *         parameters in the TIM_HandleTypeDef and create the associated handle.
+  * @param  htim : TIM OnePulse handle
+  * @param  OnePulseMode : Select the One pulse mode.
+  *         This parameter can be one of the following values:
+  *            @arg TIM_OPMODE_SINGLE: Only one pulse will be generated.
+  *            @arg TIM_OPMODE_REPETITIVE: Repetitive pulses wil be generated.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
+{
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+  assert_param(IS_TIM_OPM_MODE(OnePulseMode));
+
+  if(htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+    
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_OnePulse_MspInit(htim);
+  }
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+
+  /* Configure the Time base in the One Pulse Mode */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+  /* Reset the OPM Bit */
+  htim->Instance->CR1 &= ~TIM_CR1_OPM;
+
+  /* Configure the OPM Mode */
+  htim->Instance->CR1 |= OnePulseMode;
+
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM One Pulse 
+  * @param  htim : TIM One Pulse handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_TIM_OnePulse_MspDeInit(htim);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM One Pulse MSP.
+  * @param  htim : TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_OnePulse_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM One Pulse MSP.
+  * @param  htim : TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM One Pulse signal generation.
+  * @param  htim : TIM One Pulse handle
+  * @param  OutputChannel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Enable the Capture compare and the Input Capture channels 
+    (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+    if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+    if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output 
+    in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together 
+
+    No need to enable the counter, it's enabled automatically by hardware 
+    (the counter starts in response to a stimulus and generate a pulse */
+
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+  if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM One Pulse signal generation.
+  * @param  htim : TIM One Pulse handle
+  * @param  OutputChannel : TIM Channels to be disable
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Disable the Capture compare and the Input Capture channels
+  (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+  if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+  if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output 
+  in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+  if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Ouput */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM One Pulse signal generation in interrupt mode.
+  * @param  htim : TIM One Pulse handle
+  * @param  OutputChannel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Enable the Capture compare and the Input Capture channels 
+    (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+    if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+    if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output 
+    in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together 
+
+    No need to enable the counter, it's enabled automatically by hardware 
+    (the counter starts in response to a stimulus and generate a pulse */
+
+  /* Enable the TIM Capture/Compare 1 interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+  /* Enable the TIM Capture/Compare 2 interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+  if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM One Pulse signal generation in interrupt mode.
+  * @param  htim : TIM One Pulse handle
+  * @param  OutputChannel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Disable the TIM Capture/Compare 1 interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+  /* Disable the TIM Capture/Compare 2 interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+  /* Disable the Capture compare and the Input Capture channels 
+  (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+  if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+  if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output 
+  in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+  if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+  {
+    /* Disable the Main Ouput */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+
+  /* Disable the Peripheral */
+   __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group6 Time Encoder functions 
+ *  @brief    Time Encoder functions 
+ *
+@verbatim 
+  ==============================================================================
+                          ##### Time Encoder functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM Encoder.
+    (+) De-initialize the TIM Encoder.
+    (+) Start the Time Encoder.
+    (+) Stop the Time Encoder.
+    (+) Start the Time Encoder and enable interrupt.
+    (+) Stop the Time Encoder and disable interrupt.
+    (+) Start the Time Encoder and enable DMA transfer.
+    (+) Stop the Time Encoder and disable DMA transfer.
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Encoder Interface and create the associated handle.
+  * @param  htim : TIM Encoder Interface handle
+  * @param  sConfig : TIM Encoder Interface configuration structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim,  TIM_Encoder_InitTypeDef* sConfig)
+{
+  uint32_t tmpsmcr = 0;
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode));
+  assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection));
+  assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection));
+  assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+  assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity));
+  assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+  assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler));
+  assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+  assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter));
+
+  if(htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;
+    
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_Encoder_MspInit(htim);
+  }
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+
+  /* Reset the SMS bits */
+  htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+
+  /* Configure the Time base in the Encoder Mode */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+  /* Get the TIMx SMCR register value */
+  tmpsmcr = htim->Instance->SMCR;
+
+  /* Get the TIMx CCMR1 register value */
+  tmpccmr1 = htim->Instance->CCMR1;
+
+  /* Get the TIMx CCER register value */
+  tmpccer = htim->Instance->CCER;
+
+  /* Set the encoder Mode */
+  tmpsmcr |= sConfig->EncoderMode;
+
+  /* Select the Capture Compare 1 and the Capture Compare 2 as input */
+  tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S);
+  tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8));
+
+  /* Set the the Capture Compare 1 and the Capture Compare 2 prescalers and filters */
+  tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC);
+  tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F);
+  tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8);
+  tmpccmr1 |= (sConfig->IC1Filter << 4) | (sConfig->IC2Filter << 12);
+
+  /* Set the TI1 and the TI2 Polarities */
+  tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P);
+  tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP);
+  tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4);
+
+  /* Write to TIMx SMCR */
+  htim->Instance->SMCR = tmpsmcr;
+
+  /* Write to TIMx CCMR1 */
+  htim->Instance->CCMR1 = tmpccmr1;
+
+  /* Write to TIMx CCER */
+  htim->Instance->CCER = tmpccer;
+
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  DeInitializes the TIM Encoder interface 
+  * @param  htim : TIM Encoder handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_TIM_Encoder_MspDeInit(htim);
+
+  /* Change TIM state */
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Encoder Interface MSP.
+  * @param  htim : TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_Encoder_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Encoder Interface MSP.
+  * @param  htim : TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_Encoder_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM Encoder Interface.
+  * @param  htim : TIM Encoder Interface handle
+  * @param  Channel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+  /* Enable the encoder interface channels */
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+      break;
+  }
+    case TIM_CHANNEL_2:
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+      break;
+  }
+    default :
+  {
+     TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+     TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+     break;
+    }
+  }
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Encoder Interface.
+  * @param  htim : TIM Encoder Interface handle
+  * @param  Channel : TIM Channels to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+    assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+   /* Disable the Input Capture channels 1 and 2
+    (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+  {
+     TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+      break;
+  }
+    case TIM_CHANNEL_2:
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+      break;
+  }
+    default :
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+     break;
+    }
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Encoder Interface in interrupt mode.
+  * @param  htim : TIM Encoder Interface handle
+  * @param  Channel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+  /* Enable the encoder interface channels */
+  /* Enable the capture compare Interrupts 1 and/or 2 */
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+    __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+      break;
+  }
+    case TIM_CHANNEL_2:
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+    __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+      break;
+  }
+    default :
+  {
+     TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+     TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+     __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+     __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+     break;
+    }
+  }
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Encoder Interface in interrupt mode.
+  * @param  htim : TIM Encoder Interface handle
+  * @param  Channel : TIM Channels to be disabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+  /* Disable the Input Capture channels 1 and 2
+    (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+  if(Channel == TIM_CHANNEL_1)
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare Interrupts 1 */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+  }
+  else if(Channel == TIM_CHANNEL_2)
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare Interrupts 2 */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+  }
+  else
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare Interrupts 1 and 2 */
+    __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+    __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Encoder Interface in DMA mode.
+  * @param  htim : TIM Encoder Interface handle
+  * @param  Channel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @param  pData1 : The destination Buffer address for IC1.
+  * @param  pData2 : The destination Buffer address for IC2.
+  * @param  Length : The length of data to be transferred from TIM peripheral to memory.
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if((((pData1 == 0) || (pData2 == 0) )) && (Length > 0))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t )pData1, Length);
+
+      /* Enable the TIM Input Capture DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+      /* Enable the Peripheral */
+      __HAL_TIM_ENABLE(htim);
+
+      /* Enable the Capture compare channel */
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError;
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+      /* Enable the TIM Input Capture  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+
+      /* Enable the Peripheral */
+      __HAL_TIM_ENABLE(htim);
+
+      /* Enable the Capture compare channel */
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+    }
+    break;
+
+    case TIM_CHANNEL_ALL:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length);
+
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+     /* Enable the Peripheral */
+      __HAL_TIM_ENABLE(htim);
+
+      /* Enable the Capture compare channel */
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+      /* Enable the TIM Input Capture  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+      /* Enable the TIM Input Capture  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+
+    default:
+    break;
+  }
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Encoder Interface in DMA mode.
+  * @param  htim : TIM Encoder Interface handle
+  * @param  Channel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+  /* Disable the Input Capture channels 1 and 2
+    (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+  if(Channel == TIM_CHANNEL_1)
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare DMA Request 1 */
+    __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+  }
+  else if(Channel == TIM_CHANNEL_2)
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare DMA Request 2 */
+    __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+  }
+  else
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+    /* Disable the capture compare DMA Request 1 and 2 */
+    __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+  }
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management 
+ *  @brief    IRQ handler management 
+ *
+@verbatim 
+  ==============================================================================
+                        ##### IRQ handler management #####
+  ==============================================================================
+  [..]
+    This section provides Timer IRQ handler function.
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  This function handles TIM interrupts requests.
+  * @param  htim : TIM  handle
+  * @retval None
+  */
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim)
+{
+  /* Capture compare 1 event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) !=RESET)
+    {
+      {
+        __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1);
+        htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+
+        /* Input capture event */
+        if((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00)
+        {
+          HAL_TIM_IC_CaptureCallback(htim);
+        }
+        /* Output compare event */
+        else
+        {
+          HAL_TIM_OC_DelayElapsedCallback(htim);
+          HAL_TIM_PWM_PulseFinishedCallback(htim);
+        }
+        htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+      }
+    }
+  }
+  /* Capture compare 2 event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2);
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+      /* Input capture event */
+      if((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00)
+      {
+        HAL_TIM_IC_CaptureCallback(htim);
+      }
+      /* Output compare event */
+      else
+      {
+        HAL_TIM_OC_DelayElapsedCallback(htim);
+        HAL_TIM_PWM_PulseFinishedCallback(htim);
+      }
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+    }
+  }
+  /* Capture compare 3 event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3);
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+      /* Input capture event */
+      if((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00)
+      {
+        HAL_TIM_IC_CaptureCallback(htim);
+      }
+      /* Output compare event */
+      else
+      {
+        HAL_TIM_OC_DelayElapsedCallback(htim);
+        HAL_TIM_PWM_PulseFinishedCallback(htim);
+      }
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+    }
+  }
+  /* Capture compare 4 event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4);
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+      /* Input capture event */
+      if((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00)
+      {
+        HAL_TIM_IC_CaptureCallback(htim);
+      }
+      /* Output compare event */
+      else
+      {
+        HAL_TIM_OC_DelayElapsedCallback(htim);
+        HAL_TIM_PWM_PulseFinishedCallback(htim);
+      }
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+    }
+  }
+  /* TIM Update event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE);
+      HAL_TIM_PeriodElapsedCallback(htim);
+    }
+  }
+  /* TIM Break input event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK);
+      HAL_TIMEx_BreakCallback(htim);
+    }
+  }
+  /* TIM Trigger detection event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER);
+      HAL_TIM_TriggerCallback(htim);
+    }
+  }
+  /* TIM commutation event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM);
+      HAL_TIMEx_CommutationCallback(htim);
+    }
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group8 Peripheral Control functions
+ *  @brief   	Peripheral Control functions 
+ *
+@verbatim 
+  ==============================================================================
+                   ##### Peripheral Control functions #####
+  ==============================================================================
+ [..]
+   This section provides functions allowing to:
+      (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
+      (+) Configure External Clock source.
+      (+) Configure Complementary channels, break features and dead time.
+      (+) Configure Master and the Slave synchronization.
+      (+) Configure the DMA Burst Mode.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the TIM Output Compare Channels according to the specified
+  *         parameters in the TIM_OC_InitTypeDef.
+  * @param  htim : TIM Output Compare handle
+  * @param  sConfig : TIM Output Compare configuration structure
+  * @param  Channel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CHANNELS(Channel));
+  assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
+  assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+
+  /* Check input state */
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      /* Configure the TIM Channel 1 in Output Compare */
+      TIM_OC1_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      /* Configure the TIM Channel 2 in Output Compare */
+      TIM_OC2_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+       assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+      /* Configure the TIM Channel 3 in Output Compare */
+      TIM_OC3_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+       /* Configure the TIM Channel 4 in Output Compare */
+       TIM_OC4_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+
+    default:
+    break;
+  }
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Input Capture Channels according to the specified
+  *         parameters in the TIM_IC_InitTypeDef.
+  * @param  htim : TIM IC handle
+  * @param  sConfig : TIM Input Capture configuration structure
+  * @param  Channel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity));
+  assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection));
+  assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler));
+  assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter));
+
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  if (Channel == TIM_CHANNEL_1)
+  {
+    /* TI1 Configuration */
+    TIM_TI1_SetConfig(htim->Instance,
+               sConfig->ICPolarity,
+               sConfig->ICSelection,
+               sConfig->ICFilter);
+
+    /* Reset the IC1PSC Bits */
+    htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+    /* Set the IC1PSC value */
+    htim->Instance->CCMR1 |= sConfig->ICPrescaler;
+  }
+  else if (Channel == TIM_CHANNEL_2)
+  {
+    /* TI2 Configuration */
+    assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+    TIM_TI2_SetConfig(htim->Instance,
+                      sConfig->ICPolarity,
+                      sConfig->ICSelection,
+                      sConfig->ICFilter);
+
+    /* Reset the IC2PSC Bits */
+    htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+    /* Set the IC2PSC value */
+    htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8);
+  }
+  else if (Channel == TIM_CHANNEL_3)
+  {
+    /* TI3 Configuration */
+    assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+    TIM_TI3_SetConfig(htim->Instance,
+               sConfig->ICPolarity,
+               sConfig->ICSelection,
+               sConfig->ICFilter);
+
+    /* Reset the IC3PSC Bits */
+    htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC;
+
+    /* Set the IC3PSC value */
+    htim->Instance->CCMR2 |= sConfig->ICPrescaler;
+  }
+  else
+  {
+    /* TI4 Configuration */
+    assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+    TIM_TI4_SetConfig(htim->Instance,
+               sConfig->ICPolarity,
+               sConfig->ICSelection,
+               sConfig->ICFilter);
+
+    /* Reset the IC4PSC Bits */
+    htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC;
+
+    /* Set the IC4PSC value */
+    htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8);
+  }
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM PWM  channels according to the specified
+  *         parameters in the TIM_OC_InitTypeDef.
+  * @param  htim : TIM handle
+  * @param  sConfig : TIM PWM configuration structure
+  * @param  Channel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+  __HAL_LOCK(htim);
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CHANNELS(Channel));
+  assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
+  assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+  assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      /* Configure the Channel 1 in PWM mode */
+      TIM_OC1_SetConfig(htim->Instance, sConfig);
+
+      /* Set the Preload enable bit for channel1 */
+      htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
+
+      /* Configure the Output Fast mode */
+      htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
+      htim->Instance->CCMR1 |= sConfig->OCFastMode;
+    }
+    break;
+
+    case TIM_CHANNEL_2:
+    {
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      /* Configure the Channel 2 in PWM mode */
+      TIM_OC2_SetConfig(htim->Instance, sConfig);
+
+      /* Set the Preload enable bit for channel2 */
+      htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
+
+      /* Configure the Output Fast mode */
+      htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
+      htim->Instance->CCMR1 |= sConfig->OCFastMode << 8;
+    }
+    break;
+
+    case TIM_CHANNEL_3:
+    {
+      assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+      /* Configure the Channel 3 in PWM mode */
+      TIM_OC3_SetConfig(htim->Instance, sConfig);
+
+      /* Set the Preload enable bit for channel3 */
+      htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
+
+     /* Configure the Output Fast mode */
+      htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
+      htim->Instance->CCMR2 |= sConfig->OCFastMode;
+    }
+    break;
+
+    case TIM_CHANNEL_4:
+    {
+      assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+      /* Configure the Channel 4 in PWM mode */
+      TIM_OC4_SetConfig(htim->Instance, sConfig);
+
+      /* Set the Preload enable bit for channel4 */
+      htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
+
+     /* Configure the Output Fast mode */
+      htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
+      htim->Instance->CCMR2 |= sConfig->OCFastMode << 8;
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM One Pulse Channels according to the specified
+  *         parameters in the TIM_OnePulse_InitTypeDef.
+  * @param  htim : TIM One Pulse handle
+  * @param  sConfig : TIM One Pulse configuration structure
+  * @param  OutputChannel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @param  InputChannel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim,  TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel,  uint32_t InputChannel)
+{
+  TIM_OC_InitTypeDef temp1;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_OPM_CHANNELS(OutputChannel));
+  assert_param(IS_TIM_OPM_CHANNELS(InputChannel));
+
+  if(OutputChannel != InputChannel)
+  {
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Extract the Ouput compare configuration from sConfig structure */
+  temp1.OCMode = sConfig->OCMode;
+  temp1.Pulse = sConfig->Pulse;
+  temp1.OCPolarity = sConfig->OCPolarity;
+  temp1.OCNPolarity = sConfig->OCNPolarity;
+  temp1.OCIdleState = sConfig->OCIdleState;
+  temp1.OCNIdleState = sConfig->OCNIdleState;
+
+    switch (OutputChannel)
+  {
+    case TIM_CHANNEL_1:
+    {
+        assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+      TIM_OC1_SetConfig(htim->Instance, &temp1);
+    }
+    break;
+    case TIM_CHANNEL_2:
+    {
+        assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+      TIM_OC2_SetConfig(htim->Instance, &temp1);
+    }
+    break;
+    default:
+    break;
+  }
+  switch (InputChannel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+      TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity,
+                        sConfig->ICSelection, sConfig->ICFilter);
+
+      /* Reset the IC1PSC Bits */
+    htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+      /* Select the Trigger source */
+        htim->Instance->SMCR &= ~TIM_SMCR_TS;
+      htim->Instance->SMCR |= TIM_TS_TI1FP1;
+
+      /* Select the Slave Mode */
+        htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+      htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+    }
+    break;
+    case TIM_CHANNEL_2:
+    {
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+      TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity,
+                 sConfig->ICSelection, sConfig->ICFilter);
+
+      /* Reset the IC2PSC Bits */
+        htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+      /* Select the Trigger source */
+        htim->Instance->SMCR &= ~TIM_SMCR_TS;
+      htim->Instance->SMCR |= TIM_TS_TI2FP2;
+
+      /* Select the Slave Mode */
+        htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+      htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+    }
+    break;
+
+    default:
+    break;
+  }
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Configure the DMA Burst to transfer Data from the memory to the TIM peripheral 
+  * @param  htim : TIM handle
+  * @param  BurstBaseAddress : TIM Base address from where the DMA will start the Data write
+  *         This parameter can be one of the following values:
+  *            @arg TIM_DMABASE_CR1 
+  *            @arg TIM_DMABASE_CR2
+  *            @arg TIM_DMABASE_SMCR
+  *            @arg TIM_DMABASE_DIER
+  *            @arg TIM_DMABASE_SR
+  *            @arg TIM_DMABASE_EGR
+  *            @arg TIM_DMABASE_CCMR1
+  *            @arg TIM_DMABASE_CCMR2
+  *            @arg TIM_DMABASE_CCER
+  *            @arg TIM_DMABASE_CNT 
+  *            @arg TIM_DMABASE_PSC 
+  *            @arg TIM_DMABASE_ARR
+  *            @arg TIM_DMABASE_RCR
+  *            @arg TIM_DMABASE_CCR1
+  *            @arg TIM_DMABASE_CCR2
+  *            @arg TIM_DMABASE_CCR3 
+  *            @arg TIM_DMABASE_CCR4
+  *            @arg TIM_DMABASE_BDTR
+  *            @arg TIM_DMABASE_DCR
+  * @param  BurstRequestSrc : TIM DMA Request sources
+  *         This parameter can be one of the following values:
+  *            @arg TIM_DMA_UPDATE: TIM update Interrupt source
+  *            @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+  *            @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+  *            @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+  *            @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+  *            @arg TIM_DMA_COM: TIM Commutation DMA source
+  *            @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+  * @param  BurstBuffer : The Buffer address.
+  * @param  BurstLength : DMA Burst length. This parameter can be one value
+  *         between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+                                              uint32_t* BurstBuffer, uint32_t  BurstLength)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+  assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+  assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if((BurstBuffer == 0 ) && (BurstLength > 0))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+  switch(BurstRequestSrc)
+  {
+    case TIM_DMA_UPDATE:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_CC1:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback =  TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_CC2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback =  TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_CC3:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback =  TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_CC4:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback =  TIM_DMADelayPulseCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_COM:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback =  TIMEx_DMACommutationCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_TRIGGER:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    default:
+    break;
+  }
+   /* configure the DMA Burst Mode */
+   htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+   /* Enable the TIM DMA Request */
+   __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+   htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM DMA Burst mode 
+  * @param  htim : TIM handle
+  * @param  BurstRequestSrc : TIM DMA Request sources to disable
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+  /* Abort the DMA transfer (at least disable the DMA channel) */
+  switch(BurstRequestSrc)
+  {
+    case TIM_DMA_UPDATE:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+    }
+    break;
+    case TIM_DMA_CC1:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+    }
+    break;
+    case TIM_DMA_CC2:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+    }
+    break;
+    case TIM_DMA_CC3:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+    }
+    break;
+    case TIM_DMA_CC4:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+    }
+    break;
+    case TIM_DMA_COM:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+    }
+    break;
+    case TIM_DMA_TRIGGER:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+    }
+    break;
+    default:
+    break;
+  }
+
+  /* Disable the TIM Update DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configure the DMA Burst to transfer Data from the TIM peripheral to the memory 
+  * @param  htim : TIM handle
+  * @param  BurstBaseAddress : TIM Base address from where the DMA will starts the Data read
+  *         This parameter can be one of the following values:
+  *            @arg TIM_DMABASE_CR1 
+  *            @arg TIM_DMABASE_CR2
+  *            @arg TIM_DMABASE_SMCR
+  *            @arg TIM_DMABASE_DIER
+  *            @arg TIM_DMABASE_SR
+  *            @arg TIM_DMABASE_EGR
+  *            @arg TIM_DMABASE_CCMR1
+  *            @arg TIM_DMABASE_CCMR2
+  *            @arg TIM_DMABASE_CCER
+  *            @arg TIM_DMABASE_CNT 
+  *            @arg TIM_DMABASE_PSC 
+  *            @arg TIM_DMABASE_ARR
+  *            @arg TIM_DMABASE_RCR
+  *            @arg TIM_DMABASE_CCR1
+  *            @arg TIM_DMABASE_CCR2
+  *            @arg TIM_DMABASE_CCR3 
+  *            @arg TIM_DMABASE_CCR4
+  *            @arg TIM_DMABASE_BDTR
+  *            @arg TIM_DMABASE_DCR
+  * @param  BurstRequestSrc : TIM DMA Request sources
+  *         This parameter can be one of the following values:
+  *            @arg TIM_DMA_UPDATE: TIM update Interrupt source
+  *            @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+  *            @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+  *            @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+  *            @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+  *            @arg TIM_DMA_COM: TIM Commutation DMA source
+  *            @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+  * @param  BurstBuffer : The Buffer address.
+  * @param  BurstLength : DMA Burst length. This parameter can be one value
+  *         between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+                                             uint32_t  *BurstBuffer, uint32_t  BurstLength)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+  assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+  assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if((BurstBuffer == 0 ) && (BurstLength > 0))
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+  switch(BurstRequestSrc)
+  {
+    case TIM_DMA_UPDATE:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+       HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_CC1:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback =  TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_CC2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback =  TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_CC3:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback =  TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_CC4:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback =  TIM_DMACaptureCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_COM:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback =  TIMEx_DMACommutationCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    case TIM_DMA_TRIGGER:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
+
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
+    }
+    break;
+    default:
+    break;
+  }
+
+  /* configure the DMA Burst Mode */
+  htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+  /* Enable the TIM DMA Request */
+  __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stop the DMA burst reading 
+  * @param  htim : TIM handle
+  * @param  BurstRequestSrc : TIM DMA Request sources to disable.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+  /* Abort the DMA transfer (at least disable the DMA channel) */
+  switch(BurstRequestSrc)
+  {
+    case TIM_DMA_UPDATE:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+    }
+    break;
+    case TIM_DMA_CC1:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+    }
+    break;
+    case TIM_DMA_CC2:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+    }
+    break;
+    case TIM_DMA_CC3:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+    }
+    break;
+    case TIM_DMA_CC4:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+    }
+    break;
+    case TIM_DMA_COM:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+    }
+    break;
+    case TIM_DMA_TRIGGER:
+    {
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+    }
+    break;
+    default:
+    break;
+  }
+
+  /* Disable the TIM Update DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Generate a software event
+  * @param  htim : TIM handle
+  * @param  EventSource : specifies the event source.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source
+  *            @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source
+  *            @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source
+  *            @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source
+  *            @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source
+  *            @arg TIM_EVENTSOURCE_COM: Timer COM event source 
+  *            @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source
+  *            @arg TIM_EVENTSOURCE_BREAK: Timer Break event source
+  * @note TIM6 and TIM7 can only generate an update event.
+  * @note TIM_EVENTSOURCE_COM and TIM_EVENTSOURCE_BREAK are used only with TIM1, TIM15, TIM16 and TIM17.
+  * @retval HAL status
+  */
+
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_EVENT_SOURCE(EventSource));
+
+  /* Process Locked */
+  __HAL_LOCK(htim);
+
+  /* Change the TIM state */
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Set the event sources */
+  htim->Instance->EGR = EventSource;
+
+  /* Change the TIM state */
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the OCRef clear feature
+  * @param  htim : TIM handle
+  * @param  sClearInputConfig : pointer to a TIM_ClearInputConfigTypeDef structure that
+  *         contains the OCREF clear feature and parameters for the TIM peripheral.
+  * @param  Channel : specifies the TIM Channel
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1
+  *            @arg TIM_CHANNEL_2: TIM Channel 2
+  *            @arg TIM_CHANNEL_3: TIM Channel 3
+  *            @arg TIM_CHANNEL_4: TIM Channel 4
+  * @retval HAL status
+  */ 
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel)
+{
+  uint32_t tmpsmcr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
+  assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
+  assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
+  assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
+
+  /* Process Locked */
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  switch (sClearInputConfig->ClearInputSource)
+  {
+    case TIM_CLEARINPUTSOURCE_NONE:
+    {
+      /* Clear the OCREF clear selection bit */
+      tmpsmcr &= ~TIM_SMCR_OCCS;
+
+      /* Clear the ETR Bits */
+      tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+      /* Set TIMx_SMCR */
+      htim->Instance->SMCR = tmpsmcr;
+   }
+    break;
+
+    case TIM_CLEARINPUTSOURCE_ETR:
+    {
+      TIM_ETR_SetConfig(htim->Instance,
+                        sClearInputConfig->ClearInputPrescaler,
+                        sClearInputConfig->ClearInputPolarity,
+                        sClearInputConfig->ClearInputFilter);
+
+      /* Set the OCREF clear selection bit */
+      htim->Instance->SMCR |= TIM_SMCR_OCCS;
+    }
+    break;
+    default:
+    break;
+  }
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+      {
+        if(sClearInputConfig->ClearInputState != RESET)
+        {
+          /* Enable the Ocref clear feature for Channel 1 */
+          htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE;
+        }
+        else
+        {
+          /* Disable the Ocref clear feature for Channel 1 */
+        htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;
+        }
+      }
+      break;
+    case TIM_CHANNEL_2:
+      {
+        assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+        if(sClearInputConfig->ClearInputState != RESET)
+        {
+          /* Enable the Ocref clear feature for Channel 2 */
+          htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE;
+        }
+        else
+        {
+          /* Disable the Ocref clear feature for Channel 2 */
+          htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;
+        }
+      }
+    break;
+    case TIM_CHANNEL_3:
+      {
+        assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+        if(sClearInputConfig->ClearInputState != RESET)
+        {
+          /* Enable the Ocref clear feature for Channel 3 */
+          htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE;
+        }
+        else
+        {
+          /* Disable the Ocref clear feature for Channel 3 */
+        htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;
+        }
+      }
+    break;
+    case TIM_CHANNEL_4:
+      {
+        assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+        if(sClearInputConfig->ClearInputState != RESET)
+        {
+          /* Enable the Ocref clear feature for Channel 4 */
+          htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE;
+        }
+        else
+        {
+          /* Disable the Ocref clear feature for Channel 4 */
+        htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;
+        }
+      }
+    break;
+    default:
+    break;
+  }
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief   Configures the clock source to be used
+  * @param  htim : TIM handle
+  * @param  sClockSourceConfig : pointer to a TIM_ClockConfigTypeDef structure that
+  *         contains the clock source information for the TIM peripheral.
+  * @retval HAL status
+  */ 
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig)
+{
+  uint32_t tmpsmcr = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource));
+
+  /* Reset the SMS, TS, ECE, ETPS and ETRF bits */
+  tmpsmcr = htim->Instance->SMCR;
+  tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+  tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+  htim->Instance->SMCR = tmpsmcr;
+
+  switch (sClockSourceConfig->ClockSource)
+  {
+  case TIM_CLOCKSOURCE_INTERNAL:
+    {
+      assert_param(IS_TIM_INSTANCE(htim->Instance));
+      /* Disable slave mode to clock the prescaler directly with the internal clock */
+      htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+    }
+    break;
+
+  case TIM_CLOCKSOURCE_ETRMODE1:
+    {
+      /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/
+      assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
+
+      /* Check ETR input conditioning related parameters */
+      assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+      assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+      assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+      
+      /* Configure the ETR Clock source */
+      TIM_ETR_SetConfig(htim->Instance,
+                        sClockSourceConfig->ClockPrescaler,
+                        sClockSourceConfig->ClockPolarity,
+                        sClockSourceConfig->ClockFilter);
+      /* Get the TIMx SMCR register value */
+      tmpsmcr = htim->Instance->SMCR;
+      /* Reset the SMS and TS Bits */
+      tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+      /* Select the External clock mode1 and the ETRF trigger */
+      tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1);
+      /* Write to TIMx SMCR */
+      htim->Instance->SMCR = tmpsmcr;
+    }
+    break;
+
+  case TIM_CLOCKSOURCE_ETRMODE2:
+    {
+      /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/
+      assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance));
+
+      /* Check ETR input conditioning related parameters */
+      assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+      assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+      assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+      
+      /* Configure the ETR Clock source */
+      TIM_ETR_SetConfig(htim->Instance,
+                        sClockSourceConfig->ClockPrescaler,
+                        sClockSourceConfig->ClockPolarity,
+                        sClockSourceConfig->ClockFilter);
+      /* Enable the External clock mode2 */
+      htim->Instance->SMCR |= TIM_SMCR_ECE;
+    }
+    break;
+
+  case TIM_CLOCKSOURCE_TI1:
+    {
+      /* Check whether or not the timer instance supports external clock mode 1 */
+      assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+      /* Check TI1 input conditioning related parameters */
+      assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+      assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+      
+      TIM_TI1_ConfigInputStage(htim->Instance,
+                               sClockSourceConfig->ClockPolarity,
+                               sClockSourceConfig->ClockFilter);
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1);
+    }
+    break;
+  case TIM_CLOCKSOURCE_TI2:
+    {
+      /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/
+      assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+       /* Check TI2 input conditioning related parameters */
+      assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+      assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+      TIM_TI2_ConfigInputStage(htim->Instance,
+                               sClockSourceConfig->ClockPolarity,
+                               sClockSourceConfig->ClockFilter);
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2);
+    }
+    break;
+  case TIM_CLOCKSOURCE_TI1ED:
+    {
+      /* Check whether or not the timer instance supports external clock mode 1 */
+      assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+      /* Check TI1 input conditioning related parameters */
+      assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+      assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+      TIM_TI1_ConfigInputStage(htim->Instance,
+                               sClockSourceConfig->ClockPolarity,
+                               sClockSourceConfig->ClockFilter);
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED);
+    }
+    break;
+  case TIM_CLOCKSOURCE_ITR0:
+    {
+      /* Check whether or not the timer instance supports external clock mode 1 */
+      assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR0);
+    }
+    break;
+  case TIM_CLOCKSOURCE_ITR1:
+    {
+      /* Check whether or not the timer instance supports external clock mode 1 */
+      assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR1);
+    }
+    break;
+  case TIM_CLOCKSOURCE_ITR2:
+    {
+      /* Check whether or not the timer instance supports external clock mode 1 */
+      assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR2);
+    }
+    break;
+  case TIM_CLOCKSOURCE_ITR3:
+    {
+      /* Check whether or not the timer instance supports external clock mode 1 */
+      assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR3);
+    }
+    break;
+
+  default:
+    break;
+  }
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Selects the signal connected to the TI1 input: direct from CH1_input
+  *         or a XOR combination between CH1_input, CH2_input & CH3_input
+  * @param  htim : TIM handle.
+  * @param  TI1_Selection : Indicate whether or not channel 1 is connected to the
+  *         output of a XOR gate.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input
+  *            @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3
+  *            pins are connected to the TI1 input (XOR combination)
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
+{
+  uint32_t tmpcr2 = 0;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_TI1SELECTION(TI1_Selection));
+
+  /* Get the TIMx CR2 register value */
+  tmpcr2 = htim->Instance->CR2;
+
+  /* Reset the TI1 selection */
+  tmpcr2 &= ~TIM_CR2_TI1S;
+
+  /* Set the the TI1 selection */
+  tmpcr2 |= TI1_Selection;
+
+  /* Write to TIMxCR2 */
+  htim->Instance->CR2 = tmpcr2;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the TIM in Slave mode
+  * @param  htim : TIM handle.
+  * @param  sSlaveConfig : pointer to a TIM_SlaveConfigTypeDef structure that
+  *         contains the selected trigger (internal trigger input, filtered
+  *         timer input or external trigger input) and the ) and the Slave 
+  *         mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+  assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
+
+  /* Disable Trigger Interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER);
+
+  /* Disable Trigger DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+    }
+
+/**
+  * @brief  Configures the TIM in Slave mode in interrupt mode
+  * @param  htim: TIM handle.
+  * @param  sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that
+  *         contains the selected trigger (internal trigger input, filtered
+  *         timer input or external trigger input) and the ) and the Slave 
+  *         mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim,
+                                                        TIM_SlaveConfigTypeDef * sSlaveConfig)
+    {
+      /* Check the parameters */
+  assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+  assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
+
+  /* Enable Trigger Interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER);
+
+  /* Disable Trigger DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+  htim->State = HAL_TIM_STATE_READY;
+
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Read the captured value from Capture Compare unit
+  * @param  htim : TIM handle.
+  * @param  Channel : TIM Channels to be enabled
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1 : TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2 : TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3 : TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4 : TIM Channel 4 selected
+  * @retval Captured value
+  */
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpreg = 0;
+
+  __HAL_LOCK(htim);
+
+  switch (Channel)
+  {
+  case TIM_CHANNEL_1:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+      /* Return the capture 1 value */
+      tmpreg =  htim->Instance->CCR1;
+
+      break;
+    }
+  case TIM_CHANNEL_2:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+      /* Return the capture 2 value */
+      tmpreg =   htim->Instance->CCR2;
+
+      break;
+    }
+
+  case TIM_CHANNEL_3:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+      /* Return the capture 3 value */
+      tmpreg =   htim->Instance->CCR3;
+
+      break;
+    }
+
+  case TIM_CHANNEL_4:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+      /* Return the capture 4 value */
+      tmpreg =   htim->Instance->CCR4;
+
+      break;
+    }
+
+  default:
+    break;
+  }
+
+  __HAL_UNLOCK(htim);
+  return tmpreg;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
+ *  @brief    TIM Callbacks functions 
+ *
+@verbatim 
+  ==============================================================================
+                        ##### TIM Callbacks functions #####
+  ==============================================================================
+ [..]
+   This section provides TIM callback functions:
+   (+) Timer Period elapsed callback
+   (+) Timer Output Compare callback
+   (+) Timer Input capture callback
+   (+) Timer Trigger callback
+   (+) Timer Error callback
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Period elapsed callback in non blocking mode 
+  * @param  htim : TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the __HAL_TIM_PeriodElapsedCallback could be implemented in the user file
+   */
+
+}
+/**
+  * @brief  Output Compare callback in non blocking mode 
+  * @param  htim : TIM OC handle
+  * @retval None
+  */
+__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the __HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file
+   */
+}
+/**
+  * @brief  Input Capture callback in non blocking mode 
+  * @param  htim : TIM IC handle
+  * @retval None
+  */
+__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the __HAL_TIM_IC_CaptureCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  PWM Pulse finished callback in non blocking mode 
+  * @param  htim : TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the __HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Hall Trigger detection callback in non blocking mode 
+  * @param  htim : TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_TriggerCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Timer error callback in non blocking mode 
+  * @param  htim : TIM handle
+  * @retval None
+  */
+__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group10 Peripheral State functions 
+ *  @brief   Peripheral State functions 
+ *
+@verbatim 
+  ==============================================================================
+                        ##### Peripheral State functions #####
+  ==============================================================================
+    [..]
+    This subsection permit to get in run-time the status of the peripheral 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the TIM Base state
+  * @param  htim : TIM Base handle
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM OC state
+  * @param  htim : TIM Ouput Compare handle
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM PWM state
+  * @param  htim : TIM handle
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM Input Capture state
+  * @param  htim : TIM IC handle
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM One Pulse Mode state
+  * @param  htim : TIM OPM handle
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM Encoder Mode state
+  * @param  htim : TIM Encoder handle
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  TIM DMA error callback 
+  * @param  hdma : pointer to DMA handle.
+  * @retval None
+  */
+void TIM_DMAError(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  htim->State= HAL_TIM_STATE_READY;
+
+  HAL_TIM_ErrorCallback(htim);
+}
+
+/**
+  * @brief  TIM DMA Delay Pulse complete callback.
+  * @param  hdma : pointer to DMA handle.
+  * @retval None
+  */
+void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  htim->State= HAL_TIM_STATE_READY;
+
+  if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+  }
+
+  HAL_TIM_PWM_PulseFinishedCallback(htim);
+
+  htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+/**
+  * @brief  TIM DMA Capture complete callback.
+  * @param  hdma : pointer to DMA handle.
+  * @retval None
+  */
+void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  htim->State= HAL_TIM_STATE_READY;
+
+  if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+  }
+
+  HAL_TIM_IC_CaptureCallback(htim);
+
+  htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+  * @brief  TIM DMA Period Elapse complete callback.
+  * @param  hdma : pointer to DMA handle.
+  * @retval None
+  */
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  htim->State= HAL_TIM_STATE_READY;
+
+  HAL_TIM_PeriodElapsedCallback(htim);
+}
+
+/**
+  * @brief  TIM DMA Trigger callback.
+  * @param  hdma : pointer to DMA handle.
+  * @retval None
+  */
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  htim->State= HAL_TIM_STATE_READY;
+
+  HAL_TIM_TriggerCallback(htim);
+}
+
+/**
+  * @brief  Time Base configuration
+  * @param  TIMx : TIM periheral
+  * @param  Structure : TIM Base configuration structure
+  * @retval None
+  */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure)
+{
+  uint32_t tmpcr1 = 0;
+  tmpcr1 = TIMx->CR1;
+
+  /* Set TIM Time Base Unit parameters ---------------------------------------*/
+  if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx))
+  {
+    /* Select the Counter Mode */
+    tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS);
+    tmpcr1 |= Structure->CounterMode;
+  }
+
+  if(IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx))
+  {
+    /* Set the clock division */
+    tmpcr1 &= ~TIM_CR1_CKD;
+    tmpcr1 |= (uint32_t)Structure->ClockDivision;
+  }
+
+  TIMx->CR1 = tmpcr1;
+
+  /* Set the Autoreload value */
+  TIMx->ARR = (uint32_t)Structure->Period ;
+
+  /* Set the Prescaler value */
+  TIMx->PSC = (uint32_t)Structure->Prescaler;
+
+  if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx))
+  {
+    /* Set the Repetition Counter value */
+    TIMx->RCR = Structure->RepetitionCounter;
+  }
+
+  /* Generate an update event to reload the Prescaler 
+     and the repetition counter(only for TIM1 and TIM8) value immediatly */
+  TIMx->EGR = TIM_EGR_UG;
+}
+
+/**
+  * @brief  Time Ouput Compare 1 configuration
+  * @param  TIMx to select the TIM peripheral
+  * @param  OC_Config : The ouput configuration structure
+  * @retval None
+  */
+static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx = 0;
+  uint32_t tmpccer = 0;
+  uint32_t tmpcr2 = 0;
+
+   /* Disable the Channel 1: Reset the CC1E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC1E;
+
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 =  TIMx->CR2;
+
+  /* Get the TIMx CCMR1 register value */
+  tmpccmrx = TIMx->CCMR1;
+
+  /* Reset the Output Compare Mode Bits */
+  tmpccmrx &= ~TIM_CCMR1_OC1M;
+  tmpccmrx &= ~TIM_CCMR1_CC1S;
+  /* Select the Output Compare Mode */
+  tmpccmrx |= OC_Config->OCMode;
+
+  /* Reset the Output Polarity level */
+  tmpccer &= ~TIM_CCER_CC1P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= OC_Config->OCPolarity;
+
+  if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1))
+  {
+    /* Check parameters */
+    assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+    /* Reset the Output N Polarity level */
+    tmpccer &= ~TIM_CCER_CC1NP;
+    /* Set the Output N Polarity */
+    tmpccer |= OC_Config->OCNPolarity;
+    /* Reset the Output N State */
+    tmpccer &= ~TIM_CCER_CC1NE;
+  }
+
+  if(IS_TIM_BREAK_INSTANCE(TIMx))
+  {
+    /* Check parameters */
+    assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+    assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+    /* Reset the Output Compare and Output Compare N IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS1;
+    tmpcr2 &= ~TIM_CR2_OIS1N;
+    /* Set the Output Idle state */
+    tmpcr2 |= OC_Config->OCIdleState;
+    /* Set the Output N Idle state */
+    tmpcr2 |= OC_Config->OCNIdleState;
+  }
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+
+  /* Write to TIMx CCMR1 */
+  TIMx->CCMR1 = tmpccmrx;
+
+  /* Set the Capture Compare Register value */
+  TIMx->CCR1 = OC_Config->Pulse;
+
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Time Ouput Compare 2 configuration
+  * @param  TIMx  to select the TIM peripheral
+  * @param  OC_Config : The ouput configuration structure
+  * @retval None
+  */
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx = 0;
+  uint32_t tmpccer = 0;
+  uint32_t tmpcr2 = 0;
+
+  /* Disable the Channel 2: Reset the CC2E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC2E;
+
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 =  TIMx->CR2;
+
+  /* Get the TIMx CCMR1 register value */
+  tmpccmrx = TIMx->CCMR1;
+
+  /* Reset the Output Compare mode and Capture/Compare selection Bits */
+  tmpccmrx &= ~TIM_CCMR1_OC2M;
+  tmpccmrx &= ~TIM_CCMR1_CC2S;
+
+  /* Select the Output Compare Mode */
+  tmpccmrx |= (OC_Config->OCMode << 8);
+
+  /* Reset the Output Polarity level */
+  tmpccer &= ~TIM_CCER_CC2P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= (OC_Config->OCPolarity << 4);
+
+  if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2))
+  {
+    assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+    /* Reset the Output N Polarity level */
+    tmpccer &= ~TIM_CCER_CC2NP;
+    /* Set the Output N Polarity */
+    tmpccer |= (OC_Config->OCNPolarity << 4);
+    /* Reset the Output N State */
+    tmpccer &= ~TIM_CCER_CC2NE;
+
+  }
+
+  if(IS_TIM_BREAK_INSTANCE(TIMx))
+  {
+    /* Check parameters */
+    assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+    assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+    /* Reset the Output Compare and Output Compare N IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS2;
+    tmpcr2 &= ~TIM_CR2_OIS2N;
+    /* Set the Output Idle state */
+    tmpcr2 |= (OC_Config->OCIdleState << 2);
+    /* Set the Output N Idle state */
+    tmpcr2 |= (OC_Config->OCNIdleState << 2);
+  }
+
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+
+  /* Write to TIMx CCMR1 */
+  TIMx->CCMR1 = tmpccmrx;
+
+  /* Set the Capture Compare Register value */
+  TIMx->CCR2 = OC_Config->Pulse;
+
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Time Ouput Compare 3 configuration
+  * @param  TIMx  to select the TIM peripheral
+  * @param  OC_Config : The ouput configuration structure
+  * @retval None
+  */
+static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx = 0;
+  uint32_t tmpccer = 0;
+  uint32_t tmpcr2 = 0;
+
+  /* Disable the Channel 3: Reset the CC2E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC3E;
+
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 =  TIMx->CR2;
+
+  /* Get the TIMx CCMR2 register value */
+  tmpccmrx = TIMx->CCMR2;
+
+  /* Reset the Output Compare mode and Capture/Compare selection Bits */
+  tmpccmrx &= ~TIM_CCMR2_OC3M;
+  tmpccmrx &= ~TIM_CCMR2_CC3S;
+  /* Select the Output Compare Mode */
+  tmpccmrx |= OC_Config->OCMode;
+
+  /* Reset the Output Polarity level */
+  tmpccer &= ~TIM_CCER_CC3P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= (OC_Config->OCPolarity << 8);
+
+  if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3))
+  {
+    assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+    /* Reset the Output N Polarity level */
+    tmpccer &= ~TIM_CCER_CC3NP;
+    /* Set the Output N Polarity */
+    tmpccer |= (OC_Config->OCNPolarity << 8);
+    /* Reset the Output N State */
+    tmpccer &= ~TIM_CCER_CC3NE;
+  }
+
+  if(IS_TIM_BREAK_INSTANCE(TIMx))
+  {
+    /* Check parameters */
+    assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+    assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+    /* Reset the Output Compare and Output Compare N IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS3;
+    tmpcr2 &= ~TIM_CR2_OIS3N;
+    /* Set the Output Idle state */
+    tmpcr2 |= (OC_Config->OCIdleState << 4);
+    /* Set the Output N Idle state */
+    tmpcr2 |= (OC_Config->OCNIdleState << 4);
+  }
+
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+
+  /* Write to TIMx CCMR2 */
+  TIMx->CCMR2 = tmpccmrx;
+
+  /* Set the Capture Compare Register value */
+  TIMx->CCR3 = OC_Config->Pulse;
+
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Time Ouput Compare 4 configuration
+  * @param  TIMx  to select the TIM peripheral
+  * @param  OC_Config : The ouput configuration structure
+  * @retval None
+  */
+static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx = 0;
+  uint32_t tmpccer = 0;
+  uint32_t tmpcr2 = 0;
+
+  /* Disable the Channel 4: Reset the CC4E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC4E;
+
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 =  TIMx->CR2;
+
+  /* Get the TIMx CCMR2 register value */
+  tmpccmrx = TIMx->CCMR2;
+
+  /* Reset the Output Compare mode and Capture/Compare selection Bits */
+  tmpccmrx &= ~TIM_CCMR2_OC4M;
+  tmpccmrx &= ~TIM_CCMR2_CC4S;
+
+  /* Select the Output Compare Mode */
+  tmpccmrx |= (OC_Config->OCMode << 8);
+
+  /* Reset the Output Polarity level */
+  tmpccer &= ~TIM_CCER_CC4P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= (OC_Config->OCPolarity << 12);
+
+  if(IS_TIM_BREAK_INSTANCE(TIMx))
+  {
+    assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+   /* Reset the Output Compare IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS4;
+    /* Set the Output Idle state */
+    tmpcr2 |= (OC_Config->OCIdleState << 6);
+  }
+
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+
+  /* Write to TIMx CCMR2 */
+  TIMx->CCMR2 = tmpccmrx;
+
+  /* Set the Capture Compare Register value */
+  TIMx->CCR4 = OC_Config->Pulse;
+
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+
+/**
+  * @brief  Time Slave configuration
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sSlaveConfig: The slave configuration structure
+  * @retval None
+  */
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+                              TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+  uint32_t tmpsmcr = 0;
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Get the TIMx SMCR register value */
+  tmpsmcr = htim->Instance->SMCR;
+
+  /* Reset the Trigger Selection Bits */
+  tmpsmcr &= ~TIM_SMCR_TS;
+  /* Set the Input Trigger source */
+  tmpsmcr |= sSlaveConfig->InputTrigger;
+
+  /* Reset the slave mode Bits */
+  tmpsmcr &= ~TIM_SMCR_SMS;
+  /* Set the slave mode */
+  tmpsmcr |= sSlaveConfig->SlaveMode;
+
+  /* Write to TIMx SMCR */
+  htim->Instance->SMCR = tmpsmcr;
+
+  /* Configure the trigger prescaler, filter, and polarity */
+  switch (sSlaveConfig->InputTrigger)
+  {
+  case TIM_TS_ETRF:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
+      assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+      /* Configure the ETR Trigger source */
+      TIM_ETR_SetConfig(htim->Instance,
+                        sSlaveConfig->TriggerPrescaler,
+                        sSlaveConfig->TriggerPolarity,
+                        sSlaveConfig->TriggerFilter);
+    }
+    break;
+
+  case TIM_TS_TI1F_ED:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+      /* Disable the Channel 1: Reset the CC1E Bit */
+      tmpccer = htim->Instance->CCER;
+      htim->Instance->CCER &= ~TIM_CCER_CC1E;
+      tmpccmr1 = htim->Instance->CCMR1;
+
+      /* Set the filter */
+      tmpccmr1 &= ~TIM_CCMR1_IC1F;
+      tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4);
+
+      /* Write to TIMx CCMR1 and CCER registers */
+      htim->Instance->CCMR1 = tmpccmr1;
+      htim->Instance->CCER = tmpccer;
+
+    }
+    break;
+
+  case TIM_TS_TI1FP1:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+      /* Configure TI1 Filter and Polarity */
+      TIM_TI1_ConfigInputStage(htim->Instance,
+                               sSlaveConfig->TriggerPolarity,
+                               sSlaveConfig->TriggerFilter);
+    }
+    break;
+
+  case TIM_TS_TI2FP2:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+      /* Configure TI2 Filter and Polarity */
+      TIM_TI2_ConfigInputStage(htim->Instance,
+                                sSlaveConfig->TriggerPolarity,
+                                sSlaveConfig->TriggerFilter);
+    }
+    break;
+
+  case TIM_TS_ITR0:
+    {
+      /* Check the parameter */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    }
+    break;
+
+  case TIM_TS_ITR1:
+    {
+      /* Check the parameter */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    }
+    break;
+
+  case TIM_TS_ITR2:
+    {
+      /* Check the parameter */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    }
+    break;
+
+  case TIM_TS_ITR3:
+    {
+      /* Check the parameter */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    }
+    break;
+
+  default:
+    break;
+  }
+}
+
+/**
+  * @brief  Configure the TI1 as Input.
+  * @param  TIMx  to select the TIM peripheral.
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPOLARITY_RISING
+  *            @arg TIM_ICPOLARITY_FALLING
+  *            @arg TIM_ICPOLARITY_BOTHEDGE
+  * @param  TIM_ICSelection : specifies the input to be used.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICSELECTION_DIRECTTI:    TIM Input 1 is selected to be connected to IC1.
+  *            @arg TIM_ICSELECTION_INDIRECTTI:  TIM Input 1 is selected to be connected to IC2.
+  *            @arg TIM_ICSELECTION_TRC:         TIM Input 1 is selected to be connected to TRC.
+  * @param  TIM_ICFilter : Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 
+  *       (on channel2 path) is used as the input signal. Therefore CCMR1 must be 
+  *        protected against un-initialized filter and polarity values.
+  */
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Disable the Channel 1: Reset the CC1E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC1E;
+  tmpccmr1 = TIMx->CCMR1;
+  tmpccer = TIMx->CCER;
+
+  /* Select the Input */
+  if(IS_TIM_CC2_INSTANCE(TIMx) != RESET)
+  {
+    tmpccmr1 &= ~TIM_CCMR1_CC1S;
+    tmpccmr1 |= TIM_ICSelection;
+  }
+  else
+  {
+    tmpccmr1 |= TIM_CCMR1_CC1S_0;
+  }
+
+  /* Set the filter */
+  tmpccmr1 &= ~TIM_CCMR1_IC1F;
+  tmpccmr1 |= ((TIM_ICFilter << 4) & TIM_CCMR1_IC1F);
+
+  /* Select the Polarity and set the CC1E Bit */
+  tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+  tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP));
+
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the Polarity and Filter for TI1.
+  * @param  TIMx  to select the TIM peripheral.
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPOLARITY_RISING   
+  *            @arg TIM_ICPOLARITY_FALLING  
+  *            @arg TIM_ICPOLARITY_BOTHEDGE 
+  * @param  TIM_ICFilter : Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  */
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Disable the Channel 1: Reset the CC1E Bit */
+  tmpccer = TIMx->CCER;
+  TIMx->CCER &= ~TIM_CCER_CC1E;
+  tmpccmr1 = TIMx->CCMR1;
+
+  /* Set the filter */
+  tmpccmr1 &= ~TIM_CCMR1_IC1F;
+  tmpccmr1 |= (TIM_ICFilter << 4);
+
+  /* Select the Polarity and set the CC1E Bit */
+  tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+  tmpccer |= TIM_ICPolarity;
+
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the TI2 as Input.
+  * @param  TIMx  to select the TIM peripheral
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPOLARITY_RISING   
+  *            @arg TIM_ICPOLARITY_FALLING  
+  *            @arg TIM_ICPOLARITY_BOTHEDGE 
+  * @param  TIM_ICSelection : specifies the input to be used.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICSELECTION_DIRECTTI:   TIM Input 2 is selected to be connected to IC2.
+  *            @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1.
+  *            @arg TIM_ICSELECTION_TRC:        TIM Input 2 is selected to be connected to TRC.
+  * @param  TIM_ICFilter : Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 
+  *       (on channel1 path) is used as the input signal. Therefore CCMR1 must be 
+  *        protected against un-initialized filter and polarity values.
+  */
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Disable the Channel 2: Reset the CC2E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC2E;
+  tmpccmr1 = TIMx->CCMR1;
+  tmpccer = TIMx->CCER;
+
+  /* Select the Input */
+  tmpccmr1 &= ~TIM_CCMR1_CC2S;
+  tmpccmr1 |= (TIM_ICSelection << 8);
+
+  /* Set the filter */
+  tmpccmr1 &= ~TIM_CCMR1_IC2F;
+  tmpccmr1 |= ((TIM_ICFilter << 12) & TIM_CCMR1_IC2F);
+
+  /* Select the Polarity and set the CC2E Bit */
+  tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+  tmpccer |= ((TIM_ICPolarity << 4) & (TIM_CCER_CC2P | TIM_CCER_CC2NP));
+
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1 ;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the Polarity and Filter for TI2.
+  * @param  TIMx  to select the TIM peripheral.
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPOLARITY_RISING  
+  *            @arg TIM_ICPOLARITY_FALLING 
+  *            @arg TIM_ICPOLARITY_BOTHEDGE
+  * @param  TIM_ICFilter : Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  */
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Disable the Channel 2: Reset the CC2E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC2E;
+  tmpccmr1 = TIMx->CCMR1;
+  tmpccer = TIMx->CCER;
+
+  /* Set the filter */
+  tmpccmr1 &= ~TIM_CCMR1_IC2F;
+  tmpccmr1 |= (TIM_ICFilter << 12);
+
+  /* Select the Polarity and set the CC2E Bit */
+  tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+  tmpccer |= (TIM_ICPolarity << 4);
+
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1 ;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the TI3 as Input.
+  * @param  TIMx  to select the TIM peripheral
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPOLARITY_RISING  
+  *            @arg TIM_ICPOLARITY_FALLING 
+  *            @arg TIM_ICPOLARITY_BOTHEDGE
+  * @param  TIM_ICSelection : specifies the input to be used.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICSELECTION_DIRECTTI:   TIM Input 3 is selected to be connected to IC3.
+  *            @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4.
+  *            @arg TIM_ICSELECTION_TRC:        TIM Input 3 is selected to be connected to TRC.
+  * @param  TIM_ICFilter : Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 
+  *       (on channel1 path) is used as the input signal. Therefore CCMR2 must be 
+  *        protected against un-initialized filter and polarity values.
+  */
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr2 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Disable the Channel 3: Reset the CC3E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC3E;
+  tmpccmr2 = TIMx->CCMR2;
+  tmpccer = TIMx->CCER;
+
+  /* Select the Input */
+  tmpccmr2 &= ~TIM_CCMR2_CC3S;
+  tmpccmr2 |= TIM_ICSelection;
+
+  /* Set the filter */
+  tmpccmr2 &= ~TIM_CCMR2_IC3F;
+  tmpccmr2 |= ((TIM_ICFilter << 4) & TIM_CCMR2_IC3F);
+
+  /* Select the Polarity and set the CC3E Bit */
+  tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP);
+  tmpccer |= ((TIM_ICPolarity << 8) & (TIM_CCER_CC3P | TIM_CCER_CC3NP));
+
+  /* Write to TIMx CCMR2 and CCER registers */
+  TIMx->CCMR2 = tmpccmr2;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the TI4 as Input.
+  * @param  TIMx to select the TIM peripheral
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPOLARITY_RISING  
+  *            @arg TIM_ICPOLARITY_FALLING 
+  *            @arg TIM_ICPOLARITY_BOTHEDGE
+  * @param  TIM_ICSelection : specifies the input to be used.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICSELECTION_DIRECTTI:   TIM Input 4 is selected to be connected to IC4.
+  *            @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3.
+  *            @arg TIM_ICSELECTION_TRC:        TIM Input 4 is selected to be connected to TRC.
+  * @param  TIM_ICFilter : Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 
+  *       (on channel1 path) is used as the input signal. Therefore CCMR2 must be 
+  *        protected against un-initialized filter and polarity values.
+  * @retval None
+  */
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr2 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Disable the Channel 4: Reset the CC4E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC4E;
+  tmpccmr2 = TIMx->CCMR2;
+  tmpccer = TIMx->CCER;
+
+  /* Select the Input */
+  tmpccmr2 &= ~TIM_CCMR2_CC4S;
+  tmpccmr2 |= (TIM_ICSelection << 8);
+
+  /* Set the filter */
+  tmpccmr2 &= ~TIM_CCMR2_IC4F;
+  tmpccmr2 |= ((TIM_ICFilter << 12) & TIM_CCMR2_IC4F);
+
+  /* Select the Polarity and set the CC4E Bit */
+  tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP);
+  tmpccer |= ((TIM_ICPolarity << 12) & (TIM_CCER_CC4P | TIM_CCER_CC4NP));
+
+  /* Write to TIMx CCMR2 and CCER registers */
+  TIMx->CCMR2 = tmpccmr2;
+  TIMx->CCER = tmpccer ;
+}
+
+/**
+  * @brief  Selects the Input Trigger source
+  * @param  TIMx  to select the TIM peripheral
+  * @param  InputTriggerSource : The Input Trigger source.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_TS_ITR0 : Internal Trigger 0
+  *            @arg TIM_TS_ITR1 : Internal Trigger 1
+  *            @arg TIM_TS_ITR2 : Internal Trigger 2
+  *            @arg TIM_TS_ITR3 : Internal Trigger 3
+  *            @arg TIM_TS_TI1F_ED : TI1 Edge Detector
+  *            @arg TIM_TS_TI1FP1 : Filtered Timer Input 1
+  *            @arg TIM_TS_TI2FP2 : Filtered Timer Input 2
+  *            @arg TIM_TS_ETRF : External Trigger input
+  * @retval None
+  */
+static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint16_t InputTriggerSource)
+{
+  uint32_t tmpsmcr = 0;
+
+   /* Get the TIMx SMCR register value */
+   tmpsmcr = TIMx->SMCR;
+   /* Reset the TS Bits */
+   tmpsmcr &= ~TIM_SMCR_TS;
+   /* Set the Input Trigger source and the slave mode*/
+   tmpsmcr |= InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1;
+   /* Write to TIMx SMCR */
+   TIMx->SMCR = tmpsmcr;
+}
+/**
+  * @brief  Configures the TIMx External Trigger (ETR).
+  * @param  TIMx  to select the TIM peripheral
+  * @param  TIM_ExtTRGPrescaler : The external Trigger Prescaler.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF.
+  *            @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2.
+  *            @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4.
+  *            @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8.
+  * @param  TIM_ExtTRGPolarity : The external Trigger Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active.
+  *            @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active.
+  * @param  ExtTRGFilter : External Trigger Filter.
+  *          This parameter must be a value between 0x00 and 0x0F
+  * @retval None
+  */
+static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+                       uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
+{
+  uint32_t tmpsmcr = 0;
+
+  tmpsmcr = TIMx->SMCR;
+
+  /* Reset the ETR Bits */
+  tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+  /* Set the Prescaler, the Filter value and the Polarity */
+  tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8)));
+
+  /* Write to TIMx SMCR */
+  TIMx->SMCR = tmpsmcr;
+}
+
+/**
+  * @brief  Enables or disables the TIM Capture Compare Channel x.
+  * @param  TIMx  to select the TIM peripheral
+  * @param  Channel : specifies the TIM Channel
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1
+  *            @arg TIM_CHANNEL_2: TIM Channel 2
+  *            @arg TIM_CHANNEL_3: TIM Channel 3
+  *            @arg TIM_CHANNEL_4: TIM Channel 4
+  * @param  ChannelState : specifies the TIM Channel CCxE bit new state.
+  *          This parameter can be: TIM_CCx_ENABLE or TIM_CCx_Disable.
+  * @retval None
+  */
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState)
+{
+  uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CC1_INSTANCE(TIMx));
+  assert_param(IS_TIM_CHANNELS(Channel));
+
+  tmp = TIM_CCER_CC1E << Channel;
+
+  /* Reset the CCxE Bit */
+  TIMx->CCER &= ~tmp;
+
+  /* Set or reset the CCxE Bit */
+  TIMx->CCER |=  (uint32_t)(ChannelState << Channel);
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/