Mercurial > pub > halpp
diff l476rg/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h @ 0:32a3b1785697
a rough draft of Hardware Abstraction Layer for C++
STM32L476RG drivers
| author | cin |
|---|---|
| date | Thu, 12 Jan 2017 02:45:43 +0300 |
| parents | |
| children |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/l476rg/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h Thu Jan 12 02:45:43 2017 +0300 @@ -0,0 +1,444 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_tim_ex.h + * @author MCD Application Team + * @version V1.6.0 + * @date 28-October-2016 + * @brief Header file of TIM HAL Extended module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L4xx_HAL_TIM_EX_H +#define __STM32L4xx_HAL_TIM_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIMEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types + * @{ + */ + +/** + * @brief TIM Hall sensor Configuration Structure definition + */ + +typedef struct +{ + + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ +} TIM_HallSensor_InitTypeDef; + +/** + * @brief TIM Break/Break2 input configuration + */ +typedef struct { + uint32_t Source; /*!< Specifies the source of the timer break input. + This parameter can be a value of @ref TIMEx_Break_Input_Source */ + uint32_t Enable; /*!< Specifies whether or not the break input source is enabled. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */ + uint32_t Polarity; /*!< Specifies the break input source polarity. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity + Not relevant when analog watchdog output of the DFSDM1 used as break input source */ +} TIMEx_BreakInputConfigTypeDef; + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants + * @{ + */ + +/** @defgroup TIMEx_Remap TIM Extended Remapping + * @{ + */ +#define TIM_TIM1_ETR_ADC1_NONE ((uint32_t)(0x00000000)) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/ +#define TIM_TIM1_ETR_ADC1_AWD1 (TIM1_OR1_ETR_ADC1_RMP_0) /* !< TIM1_ETR is connected to ADC1 AWD1 */ +#define TIM_TIM1_ETR_ADC1_AWD2 (TIM1_OR1_ETR_ADC1_RMP_1) /* !< TIM1_ETR is connected to ADC1 AWD2 */ +#define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_OR1_ETR_ADC1_RMP_1 | TIM1_OR1_ETR_ADC1_RMP_0) /* !< TIM1_ETR is connected to ADC1 AWD3 */ +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) +#define TIM_TIM1_ETR_ADC3_NONE ((uint32_t)(0x00000000)) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/ +#define TIM_TIM1_ETR_ADC3_AWD1 (TIM1_OR1_ETR_ADC3_RMP_0) /* !< TIM1_ETR is connected to ADC3 AWD1 */ +#define TIM_TIM1_ETR_ADC3_AWD2 (TIM1_OR1_ETR_ADC3_RMP_1) /* !< TIM1_ETR is connected to ADC3 AWD2 */ +#define TIM_TIM1_ETR_ADC3_AWD3 (TIM1_OR1_ETR_ADC3_RMP_1 | TIM1_OR1_ETR_ADC3_RMP_0) /* !< TIM1_ETR is connected to ADC3 AWD3 */ +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ +#define TIM_TIM1_TI1_GPIO ((uint32_t)(0x00000000)) /* !< TIM1 TI1 is connected to GPIO */ +#define TIM_TIM1_TI1_COMP1 (TIM1_OR1_TI1_RMP) /* !< TIM1 TI1 is connected to COMP1 */ +#define TIM_TIM1_ETR_COMP1 (TIM1_OR2_ETRSEL_0) /* !< TIM1_ETR is connected to COMP1 output */ +#define TIM_TIM1_ETR_COMP2 (TIM1_OR2_ETRSEL_1) /* !< TIM1_ETR is connected to COMP2 output */ + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) +#define TIM_TIM2_ITR1_TIM8_TRGO ((uint32_t)(0x00000000)) /* !< TIM2_ITR1 is connected to TIM8_TRGO */ +#define TIM_TIM2_ITR1_OTG_FS_SOF (TIM2_OR1_ITR1_RMP) /* !< TIM2_ITR1 is connected to OTG_FS SOF */ +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ +#if defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || \ + defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) +#define TIM_TIM2_ITR1_NONE ((uint32_t)(0x00000000)) /* !< No internal trigger on TIM2_ITR1 */ +#define TIM_TIM2_ITR1_USB_SOF (TIM2_OR1_ITR1_RMP) /* !< TIM2_ITR1 is connected to USB SOF */ +#endif /* STM32L431xx || STM32L432xx || STM32L442xx || STM32L433xx || STM32L443xx || */ + /* STM32L451xx || STM32L452xx || STM32L462xx */ +#define TIM_TIM2_ETR_GPIO ((uint32_t)(0x00000000)) /* !< TIM2_ETR is connected to GPIO */ +#define TIM_TIM2_ETR_LSE (TIM2_OR1_ETR1_RMP) /* !< TIM2_ETR is connected to LSE */ +#define TIM_TIM2_ETR_COMP1 (TIM2_OR2_ETRSEL_0) /* !< TIM2_ETR is connected to COMP1 output */ +#define TIM_TIM2_ETR_COMP2 (TIM2_OR2_ETRSEL_1) /* !< TIM2_ETR is connected to COMP2 output */ +#define TIM_TIM2_TI4_GPIO ((uint32_t)(0x00000000)) /* !< TIM2 TI4 is connected to GPIO */ +#define TIM_TIM2_TI4_COMP1 (TIM2_OR1_TI4_RMP_0) /* !< TIM2 TI4 is connected to COMP1 output */ +#define TIM_TIM2_TI4_COMP2 (TIM2_OR1_TI4_RMP_1) /* !< TIM2 TI4 is connected to COMP2 output */ +#define TIM_TIM2_TI4_COMP1_COMP2 (TIM2_OR1_TI4_RMP_1| TIM2_OR1_TI4_RMP_0) /* !< TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output2 */ + +#if defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || \ + defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) +#define TIM_TIM3_TI1_GPIO ((uint32_t)(0x00000000)) /* !< TIM3 TI1 is connected to GPIO */ +#define TIM_TIM3_TI1_COMP1 (TIM3_OR1_TI1_RMP_0) /* !< TIM3 TI1 is connected to COMP1 output */ +#define TIM_TIM3_TI1_COMP2 (TIM3_OR1_TI1_RMP_1) /* !< TIM3 TI1 is connected to COMP2 output */ +#define TIM_TIM3_TI1_COMP1_COMP2 (TIM3_OR1_TI1_RMP_1 | TIM3_OR1_TI1_RMP_0) /* !< TIM3 TI1 is connected to logical OR between COMP1 and COMP2 output2 */ +#define TIM_TIM3_ETR_GPIO ((uint32_t)(0x00000000)) /* !< TIM3_ETR is connected to GPIO */ +#define TIM_TIM3_ETR_COMP1 (TIM3_OR2_ETRSEL_0) /* !< TIM3_ETR is connected to COMP1 output */ +#endif /* STM32L451xx || STM32L452xx || STM32L462xx || */ + /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) +#define TIM_TIM8_ETR_ADC2_NONE ((uint32_t)(0x00000000)) /* !< TIM8_ETR is not connected to any AWD (analog watchdog)*/ +#define TIM_TIM8_ETR_ADC2_AWD1 (TIM8_OR1_ETR_ADC2_RMP_0) /* !< TIM8_ETR is connected to ADC2 AWD1 */ +#define TIM_TIM8_ETR_ADC2_AWD2 (TIM8_OR1_ETR_ADC2_RMP_1) /* !< TIM8_ETR is connected to ADC2 AWD2 */ +#define TIM_TIM8_ETR_ADC2_AWD3 (TIM8_OR1_ETR_ADC2_RMP_1 | TIM8_OR1_ETR_ADC2_RMP_0) /* !< TIM8_ETR is connected to ADC2 AWD3 */ +#define TIM_TIM8_ETR_ADC3_NONE ((uint32_t)(0x00000000)) /* !< TIM8_ETR is not connected to any AWD (analog watchdog)*/ +#define TIM_TIM8_ETR_ADC3_AWD1 (TIM8_OR1_ETR_ADC3_RMP_0) /* !< TIM8_ETR is connected to ADC3 AWD1 */ +#define TIM_TIM8_ETR_ADC3_AWD2 (TIM8_OR1_ETR_ADC3_RMP_1) /* !< TIM8_ETR is connected to ADC3 AWD2 */ +#define TIM_TIM8_ETR_ADC3_AWD3 (TIM8_OR1_ETR_ADC3_RMP_1 | TIM8_OR1_ETR_ADC3_RMP_0) /* !< TIM8_ETR is connected to ADC3 AWD3 */ +#define TIM_TIM8_ETR_COMP1 (TIM8_OR2_ETRSEL_0) /* !< TIM8_ETR is connected to COMP1 output */ +#define TIM_TIM8_ETR_COMP2 (TIM8_OR2_ETRSEL_1) /* !< TIM8_ETR is connected to COMP2 output */ +#define TIM_TIM8_TI1_GPIO ((uint32_t)(0x00000000)) /* !< TIM8 TI1 is connected to GPIO */ +#define TIM_TIM8_TI1_COMP2 (TIM8_OR1_TI1_RMP) /* !< TIM8 TI1 is connected to COMP1 */ +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ + +#define TIM_TIM15_TI1_GPIO ((uint32_t)(0x00000000)) /* !< TIM15 TI1 is connected to GPIO */ +#define TIM_TIM15_TI1_LSE (TIM15_OR1_TI1_RMP) /* !< TIM15 TI1 is connected to LSE */ +#define TIM_TIM15_ENCODERMODE_NONE ((uint32_t)(0x00000000)) /* !< No redirection */ +#define TIM_TIM15_ENCODERMODE_TIM2 (TIM15_OR1_ENCODER_MODE_0) /* !< TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */ +#if defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || \ + defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) +#define TIM_TIM15_ENCODERMODE_TIM3 (TIM15_OR1_ENCODER_MODE_1) /* !< TIM3 IC1 and TIM3 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */ +#endif /* STM32L451xx || STM32L452xx || STM32L462xx */ + /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) +#define TIM_TIM15_ENCODERMODE_TIM4 (TIM15_OR1_ENCODER_MODE_1 | TIM15_OR1_ENCODER_MODE_0) /* !< TIM4 IC1 and TIM4 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */ +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ + +#define TIM_TIM16_TI1_GPIO ((uint32_t)(0x00000000)) /* !< TIM16 TI1 is connected to GPIO */ +#define TIM_TIM16_TI1_LSI (TIM16_OR1_TI1_RMP_0) /* !< TIM16 TI1 is connected to LSI */ +#define TIM_TIM16_TI1_LSE (TIM16_OR1_TI1_RMP_1) /* !< TIM16 TI1 is connected to LSE */ +#define TIM_TIM16_TI1_RTC (TIM16_OR1_TI1_RMP_1 | TIM16_OR1_TI1_RMP_0) /* !< TIM16 TI1 is connected to RTC wakeup interrupt */ +#if defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || \ + defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) +#define TIM_TIM16_TI1_MSI (TIM16_OR1_TI1_RMP_2) /* !< TIM16 TI1 is connected to MSI */ +#define TIM_TIM16_TI1_HSE_32 (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_0) /* !< TIM16 TI1 is connected to HSE div 32 */ +#define TIM_TIM16_TI1_MCO (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_1) /* !< TIM16 TI1 is connected to MCO */ +#endif /* STM32L431xx || STM32L432xx || STM32L442xx || STM32L433xx || STM32L443xx || */ + /* STM32L451xx || STM32L452xx || STM32L462xx */ + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) +#define TIM_TIM17_TI1_GPIO ((uint32_t)(0x00000000)) /* !< TIM17 TI1 is connected to GPIO */ +#define TIM_TIM17_TI1_MSI (TIM17_OR1_TI1_RMP_0) /* !< TIM17 TI1 is connected to MSI */ +#define TIM_TIM17_TI1_HSE_32 (TIM17_OR1_TI1_RMP_1) /* !< TIM17 TI1 is connected to HSE div 32 */ +#define TIM_TIM17_TI1_MCO (TIM17_OR1_TI1_RMP_1 | TIM17_OR1_TI1_RMP_0) /* !< TIM17 TI1 is connected to MCO */ +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input TIM Extended Break input + * @{ + */ +#define TIM_BREAKINPUT_BRK ((uint32_t)(0x00000001)) /* !< Timer break input */ +#define TIM_BREAKINPUT_BRK2 ((uint32_t)(0x00000002)) /* !< Timer break2 input */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source + * @{ + */ +#define TIM_BREAKINPUTSOURCE_BKIN ((uint32_t)(0x00000001)) /* !< An external source (GPIO) is connected to the BKIN pin */ +#define TIM_BREAKINPUTSOURCE_COMP1 ((uint32_t)(0x00000002)) /* !< The COMP1 output is connected to the break input */ +#define TIM_BREAKINPUTSOURCE_COMP2 ((uint32_t)(0x00000004)) /* !< The COMP2 output is connected to the break input */ +#if defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || \ + defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) +#define TIM_BREAKINPUTSOURCE_DFSDM1 ((uint32_t)(0x00000008)) /* !< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */ +#endif /* STM32L451xx || STM32L452xx || STM32L462xx || */ + /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling + * @{ + */ +#define TIM_BREAKINPUTSOURCE_DISABLE ((uint32_t)(0x00000000)) /* !< Break input source is disabled */ +#define TIM_BREAKINPUTSOURCE_ENABLE ((uint32_t)(0x00000001)) /* !< Break input source is enabled */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity + * @{ + */ +#define TIM_BREAKINPUTSOURCE_POLARITY_LOW ((uint32_t)(0x00000001)) /* !< Break input source is active low */ +#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH ((uint32_t)(0x00000000)) /* !< Break input source is active_high */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros + * @{ + */ + +/** + * @} + */ +/* End of exported macro -----------------------------------------------------*/ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros + * @{ + */ +#define IS_TIM_REMAP(__REMAP__) (((__REMAP__) <= (uint32_t)0x0001C01F)) + +#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \ + ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2)) + +#if defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || \ + defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_DFSDM1)) +#else +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2)) +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ + +#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \ + ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE)) + +#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH)) +/** + * @} + */ +/* End of private macro ------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * @{ + */ +/* Timer Hall Sensor functions **********************************************/ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); + +void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); + + /* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * @{ + */ +/* Timer Complementary Output Compare functions *****************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * @{ + */ +/* Timer Complementary PWM functions ****************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * @{ + */ +/* Timer Complementary One Pulse functions **********************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Extended Control functions ************************************************/ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, TIMEx_BreakInputConfigTypeDef *sBreakInputConfig); +HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels); +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); + +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * @{ + */ +/* Extended Callback **********************************************************/ +void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * @{ + */ +/* Extended Peripheral State functions ***************************************/ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Functions TIMEx Private Functions +* @{ +*/ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); +/** +* @} +*/ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32L4xx_HAL_TIM_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/