--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/l476rg/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c	Thu Jan 12 02:45:43 2017 +0300
@@ -0,0 +1,660 @@
+/**
+  ******************************************************************************
+  * @file    stm32l4xx_hal.c
+  * @author  MCD Application Team
+  * @version V1.6.0
+  * @date    28-October-2016
+  * @brief   HAL module driver.
+  *          This is the common part of the HAL initialization
+  *
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The common HAL driver contains a set of generic and common APIs that can be
+    used by the PPP peripheral drivers and the user to start using the HAL.
+    [..]
+    The HAL contains two APIs' categories:
+         (+) Common HAL APIs
+         (+) Services HAL APIs
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup HAL HAL
+  * @brief HAL module driver
+  * @{
+  */
+
+#ifdef HAL_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/**
+ * @brief STM32L4xx HAL Driver version number V1.6.0
+   */
+#define __STM32L4xx_HAL_VERSION_MAIN   (0x01) /*!< [31:24] main version */
+#define __STM32L4xx_HAL_VERSION_SUB1   (0x06) /*!< [23:16] sub1 version */
+#define __STM32L4xx_HAL_VERSION_SUB2   (0x00) /*!< [15:8]  sub2 version */
+#define __STM32L4xx_HAL_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
+#define __STM32L4xx_HAL_VERSION         ((__STM32L4xx_HAL_VERSION_MAIN << 24)\
+                                        |(__STM32L4xx_HAL_VERSION_SUB1 << 16)\
+                                        |(__STM32L4xx_HAL_VERSION_SUB2 << 8 )\
+                                        |(__STM32L4xx_HAL_VERSION_RC))
+
+#if defined(VREFBUF)
+#define VREFBUF_TIMEOUT_VALUE     (uint32_t)10   /* 10 ms (to be confirmed) */
+#endif /* VREFBUF */
+
+/* ------------ SYSCFG registers bit address in the alias region ------------ */
+#define SYSCFG_OFFSET             (SYSCFG_BASE - PERIPH_BASE)
+/* ---  MEMRMP Register ---*/
+/* Alias word address of FB_MODE bit */
+#define MEMRMP_OFFSET             SYSCFG_OFFSET
+#define FB_MODE_BitNumber         ((uint8_t)0x8)
+#define FB_MODE_BB                (PERIPH_BB_BASE + (MEMRMP_OFFSET * 32) + (FB_MODE_BitNumber * 4))
+
+/* --- SCSR Register ---*/
+/* Alias word address of SRAM2ER bit */
+#define SCSR_OFFSET              (SYSCFG_OFFSET + 0x18)
+#define BRER_BitNumber           ((uint8_t)0x0)
+#define SCSR_SRAM2ER_BB          (PERIPH_BB_BASE + (SCSR_OFFSET * 32) + (BRER_BitNumber * 4))
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+__IO uint32_t uwTick;
+
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Functions HAL Exported Functions
+  * @{
+  */
+
+/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
+ *  @brief    Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize the Flash interface the NVIC allocation and initial time base
+          clock configuration.
+      (+) De-initialize common part of the HAL.
+      (+) Configure the time base source to have 1ms time base with a dedicated
+          Tick interrupt priority.
+        (++) SysTick timer is used by default as source of time base, but user
+             can eventually implement his proper time base source (a general purpose
+             timer for example or other time source), keeping in mind that Time base
+             duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
+             handled in milliseconds basis.
+        (++) Time base configuration function (HAL_InitTick ()) is called automatically
+             at the beginning of the program after reset by HAL_Init() or at any time
+             when clock is configured, by HAL_RCC_ClockConfig().
+        (++) Source of time base is configured  to generate interrupts at regular
+             time intervals. Care must be taken if HAL_Delay() is called from a
+             peripheral ISR process, the Tick interrupt line must have higher priority
+            (numerically lower) than the peripheral interrupt. Otherwise the caller
+            ISR process will be blocked.
+       (++) functions affecting time base configurations are declared as __weak
+             to make  override possible  in case of other  implementations in user file.
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Configure the Flash prefetch, the Instruction and Data caches,
+  *         the time base source, NVIC and any required global low level hardware 
+  *         by calling the HAL_MspInit() callback function to be optionally defined in user file 
+  *         stm32l4xx_hal_msp.c.
+  *
+  * @note   HAL_Init() function is called at the beginning of program after reset and before 
+  *         the clock configuration.
+  *             
+  * @note   In the default implementation the System Timer (Systick) is used as source of time base.
+  *         The Systick configuration is based on MSI clock, as MSI is the clock
+  *         used after a system Reset and the NVIC configuration is set to Priority group 4.
+  *         Once done, time base tick starts incrementing: the tick variable counter is incremented 
+  *         each 1ms in the SysTick_Handler() interrupt handler.
+  *
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_Init(void)
+{
+  /* Configure Flash prefetch, Instruction cache, Data cache */
+  /* Default configuration at reset is:                      */
+  /* - Prefetch disabled                                     */
+  /* - Instruction cache enabled                             */
+  /* - Data cache enabled                                    */
+#if (INSTRUCTION_CACHE_ENABLE == 0)
+   __HAL_FLASH_INSTRUCTION_CACHE_DISABLE();
+#endif /* INSTRUCTION_CACHE_ENABLE */
+
+#if (DATA_CACHE_ENABLE == 0)
+   __HAL_FLASH_DATA_CACHE_DISABLE();
+#endif /* DATA_CACHE_ENABLE */
+
+#if (PREFETCH_ENABLE != 0)
+  __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
+#endif /* PREFETCH_ENABLE */
+
+  /* Set Interrupt Group Priority */
+  HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+
+  /* Use SysTick as time base source and configure 1ms tick (default clock after Reset is MSI) */
+  HAL_InitTick(TICK_INT_PRIORITY);
+
+  /* Init the low level hardware */
+  HAL_MspInit();
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief De-initialize common part of the HAL and stop the source of time base.
+  * @note This function is optional.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DeInit(void)
+{
+  /* Reset of all peripherals */
+  __HAL_RCC_APB1_FORCE_RESET();
+  __HAL_RCC_APB1_RELEASE_RESET();
+
+  __HAL_RCC_APB2_FORCE_RESET();
+  __HAL_RCC_APB2_RELEASE_RESET();
+
+  __HAL_RCC_AHB1_FORCE_RESET();
+  __HAL_RCC_AHB1_RELEASE_RESET();
+
+  __HAL_RCC_AHB2_FORCE_RESET();
+  __HAL_RCC_AHB2_RELEASE_RESET();
+
+  __HAL_RCC_AHB3_FORCE_RESET();
+  __HAL_RCC_AHB3_RELEASE_RESET();
+
+  /* De-Init the low level hardware */
+  HAL_MspDeInit();
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initialize the MSP.
+  * @retval None
+  */
+__weak void HAL_MspInit(void)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitialize the MSP.
+  * @retval None
+  */
+__weak void HAL_MspDeInit(void)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief This function configures the source of the time base:
+  *        The time source is configured to have 1ms time base with a dedicated
+  *        Tick interrupt priority.
+  * @note This function is called  automatically at the beginning of program after
+  *       reset by HAL_Init() or at any time when clock is reconfigured  by HAL_RCC_ClockConfig().
+  * @note In the default implementation, SysTick timer is the source of time base.
+  *       It is used to generate interrupts at regular time intervals.
+  *       Care must be taken if HAL_Delay() is called from a peripheral ISR process,
+  *       The SysTick interrupt must have higher priority (numerically lower)
+  *       than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
+  *       The function is declared as __weak  to be overwritten  in case of other
+  *       implementation  in user file.
+  * @param TickPriority: Tick interrupt priority.
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
+{
+  /*Configure the SysTick to have interrupt in 1ms time basis*/
+  HAL_SYSTICK_Config(SystemCoreClock/1000);
+
+  /*Configure the SysTick IRQ priority */
+  HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority ,0);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions
+ *  @brief    HAL Control functions
+ *
+@verbatim
+ ===============================================================================
+                      ##### HAL Control functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Provide a tick value in millisecond
+      (+) Provide a blocking delay in millisecond
+      (+) Suspend the time base source interrupt
+      (+) Resume the time base source interrupt
+      (+) Get the HAL API driver version
+      (+) Get the device identifier
+      (+) Get the device revision identifier
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief This function is called to increment a global variable "uwTick"
+  *        used as application time base.
+  * @note In the default implementation, this variable is incremented each 1ms
+  *       in SysTick ISR.
+ * @note This function is declared as __weak to be overwritten in case of other
+  *      implementations in user file.
+  * @retval None
+  */
+__weak void HAL_IncTick(void)
+{
+  uwTick++;
+}
+
+/**
+  * @brief Provide a tick value in millisecond.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval tick value
+  */
+__weak uint32_t HAL_GetTick(void)
+{
+  return uwTick;
+}
+
+/**
+  * @brief Provide accurate delay (in milliseconds) based on variable incremented.
+  * @note In the default implementation , SysTick timer is the source of time base.
+  *       It is used to generate interrupts at regular time intervals where uwTick
+  *       is incremented.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @param Delay: specifies the delay time length, in milliseconds.
+  * @retval None
+  */
+__weak void HAL_Delay(uint32_t Delay)
+{
+  uint32_t tickstart = 0;
+  tickstart = HAL_GetTick();
+  while((HAL_GetTick() - tickstart) < Delay)
+  {
+  }
+}
+
+/**
+  * @brief Suspend Tick increment.
+  * @note In the default implementation , SysTick timer is the source of time base. It is
+  *       used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
+  *       is called, the SysTick interrupt will be disabled and so Tick increment
+  *       is suspended.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_SuspendTick(void)
+{
+  /* Disable SysTick Interrupt */
+  SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+  * @brief Resume Tick increment.
+  * @note In the default implementation , SysTick timer is the source of time base. It is
+  *       used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
+  *       is called, the SysTick interrupt will be enabled and so Tick increment
+  *       is resumed.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_ResumeTick(void)
+{
+  /* Enable SysTick Interrupt */
+  SysTick->CTRL  |= SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+  * @brief  Return the HAL revision.
+  * @retval version : 0xXYZR (8bits for each decimal, R for RC)
+  */
+uint32_t HAL_GetHalVersion(void)
+{
+ return __STM32L4xx_HAL_VERSION;
+}
+
+/**
+  * @brief  Return the device revision identifier.
+  * @retval Device revision identifier
+  */
+uint32_t HAL_GetREVID(void)
+{
+   return((DBGMCU->IDCODE & DBGMCU_IDCODE_REV_ID) >> 16);
+}
+
+/**
+  * @brief  Return the device identifier.
+  * @retval Device identifier
+  */
+uint32_t HAL_GetDEVID(void)
+{
+   return(DBGMCU->IDCODE & DBGMCU_IDCODE_DEV_ID);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Exported_Functions_Group3 HAL Debug functions
+ *  @brief    HAL Debug functions
+ *
+@verbatim
+ ===============================================================================
+                      ##### HAL Debug functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Enable/Disable Debug module during SLEEP mode
+      (+) Enable/Disable Debug module during STOP0/STOP1/STOP2 modes
+      (+) Enable/Disable Debug module during STANDBY mode
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enable the Debug Module during SLEEP mode.
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGSleepMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+  * @brief  Disable the Debug Module during SLEEP mode.
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGSleepMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+  * @brief  Enable the Debug Module during STOP0/STOP1/STOP2 modes.
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGStopMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+  * @brief  Disable the Debug Module during STOP0/STOP1/STOP2 modes.
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGStopMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+  * @brief  Enable the Debug Module during STANDBY mode.
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGStandbyMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+  * @brief  Disable the Debug Module during STANDBY mode.
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGStandbyMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Exported_Functions_Group4 HAL SYSCFG configuration functions
+ *  @brief    HAL SYSCFG configuration functions
+ *
+@verbatim
+ ===============================================================================
+                      ##### HAL SYSCFG configuration functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Start a hardware SRAM2 erase operation
+      (+) Enable/Disable the Internal FLASH Bank Swapping
+      (+) Configure the Voltage reference buffer
+      (+) Enable/Disable the Voltage reference buffer
+      (+) Enable/Disable the I/O analog switch voltage booster
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Start a hardware SRAM2 erase operation.
+  * @note   As long as SRAM2 is not erased the SRAM2ER bit will be set.
+  *         This bit is automatically reset at the end of the SRAM2 erase operation.
+  * @retval None
+  */
+void HAL_SYSCFG_SRAM2Erase(void)
+{
+  /* unlock the write protection of the SRAM2ER bit */
+  SYSCFG->SKR = 0xCA;
+  SYSCFG->SKR = 0x53;
+  /* Starts a hardware SRAM2 erase operation*/
+  *(__IO uint32_t *) SCSR_SRAM2ER_BB = (uint8_t)0x00000001;
+}
+
+/**
+  * @brief  Enable the Internal FLASH Bank Swapping.
+  *
+  * @note   This function can be used only for STM32L4xx devices.
+  *
+  * @note   Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000)
+  *         and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000)
+  *
+  * @retval None
+  */
+void HAL_SYSCFG_EnableMemorySwappingBank(void)
+{
+  *(__IO uint32_t *)FB_MODE_BB = (uint32_t)ENABLE;
+}
+
+/**
+  * @brief  Disable the Internal FLASH Bank Swapping.
+  *
+  * @note   This function can be used only for STM32L4xx devices.
+  *
+  * @note   The default state : Flash Bank1 mapped at 0x08000000 (and aliased @0x0000 0000)
+  *         and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000)
+  *
+  * @retval None
+  */
+void HAL_SYSCFG_DisableMemorySwappingBank(void)
+{
+
+  *(__IO uint32_t *)FB_MODE_BB = (uint32_t)DISABLE;
+}
+
+#if defined(VREFBUF)
+/**
+  * @brief Configure the internal voltage reference buffer voltage scale.
+  * @param  VoltageScaling: specifies the output voltage to achieve
+  *          This parameter can be one of the following values:
+  *            @arg SYSCFG_VREFBUF_VOLTAGE_SCALE0: VREF_OUT1 around 2.048 V. 
+  *                                                This requires VDDA equal to or higher than 2.4 V.
+  *            @arg SYSCFG_VREFBUF_VOLTAGE_SCALE1: VREF_OUT1 around 2.5 V. 
+  *                                                This requires VDDA equal to or higher than 2.8 V.
+  * @retval None
+  */
+void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(VoltageScaling));
+  
+  MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, VoltageScaling);
+}
+
+/**
+  * @brief Configure the internal voltage reference buffer high impedance mode.
+  * @param  Mode: specifies the high impedance mode
+  *          This parameter can be one of the following values:
+  *            @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE: VREF+ pin is internally connect to VREFINT output.
+  *            @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE: VREF+ pin is high impedance.
+  * @retval None
+  */
+void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(Mode));
+  
+  MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_HIZ, Mode);
+}
+
+/**
+  * @brief  Tune the Internal Voltage Reference buffer (VREFBUF).
+  * @retval None
+  */
+void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSCFG_VREFBUF_TRIMMING(TrimmingValue));
+  
+  MODIFY_REG(VREFBUF->CCR, VREFBUF_CCR_TRIM, TrimmingValue);
+}
+
+/**
+  * @brief  Enable the Internal Voltage Reference buffer (VREFBUF).
+  * @retval HAL_OK/HAL_TIMEOUT
+  */
+HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void)
+{
+  uint32_t  tickstart = 0;
+  
+  SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR);
+  
+  /* Get Start Tick*/
+  tickstart = HAL_GetTick();
+
+  /* Wait for VRR bit  */
+  while(READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == RESET)
+  {
+    if((HAL_GetTick() - tickstart) > VREFBUF_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disable the Internal Voltage Reference buffer (VREFBUF).
+  *
+  * @retval None
+  */
+void HAL_SYSCFG_DisableVREFBUF(void)
+{
+  CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR);
+}
+#endif /* VREFBUF */
+
+/**
+  * @brief  Enable the I/O analog switch voltage booster
+  *
+  * @retval None
+  */
+void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void)
+{
+  SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN);
+}
+
+/**
+  * @brief  Disable the I/O analog switch voltage booster
+  *
+  * @retval None
+  */
+void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void)
+{
+  CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/