--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/l476rg/Src/usart.c	Thu Jan 12 02:45:43 2017 +0300
@@ -0,0 +1,132 @@
+/**
+  ******************************************************************************
+  * File Name          : USART.c
+  * Description        : This file provides code for the configuration
+  *                      of the USART instances.
+  ******************************************************************************
+  *
+  * COPYRIGHT(c) 2017 STMicroelectronics
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usart.h"
+
+#include "gpio.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+UART_HandleTypeDef huart2;
+
+/* USART2 init function */
+
+void MX_USART2_UART_Init(void)
+{
+
+  huart2.Instance = USART2;
+  huart2.Init.BaudRate = 115200;
+  huart2.Init.WordLength = UART_WORDLENGTH_8B;
+  huart2.Init.StopBits = UART_STOPBITS_1;
+  huart2.Init.Parity = UART_PARITY_NONE;
+  huart2.Init.Mode = UART_MODE_TX_RX;
+  huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart2.Init.OverSampling = UART_OVERSAMPLING_16;
+  huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+  huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
+  if (HAL_UART_Init(&huart2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+}
+
+void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct;
+  if(uartHandle->Instance==USART2)
+  {
+  /* USER CODE BEGIN USART2_MspInit 0 */
+
+  /* USER CODE END USART2_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_USART2_CLK_ENABLE();
+  
+    /**USART2 GPIO Configuration    
+    PA2     ------> USART2_TX
+    PA3     ------> USART2_RX 
+    */
+    GPIO_InitStruct.Pin = USART_TX_Pin|USART_RX_Pin;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN USART2_MspInit 1 */
+
+  /* USER CODE END USART2_MspInit 1 */
+  }
+}
+
+void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
+{
+
+  if(uartHandle->Instance==USART2)
+  {
+  /* USER CODE BEGIN USART2_MspDeInit 0 */
+
+  /* USER CODE END USART2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_USART2_CLK_DISABLE();
+  
+    /**USART2 GPIO Configuration    
+    PA2     ------> USART2_TX
+    PA3     ------> USART2_RX 
+    */
+    HAL_GPIO_DeInit(GPIOA, USART_TX_Pin|USART_RX_Pin);
+
+  }
+  /* USER CODE BEGIN USART2_MspDeInit 1 */
+
+  /* USER CODE END USART2_MspDeInit 1 */
+} 
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/